English
Language : 

MAX1480E Datasheet, PDF (19/19 Pages) Maxim Integrated Products – 15kV ESD-Protected, Isolated RS-485/RS-422
±15kV ESD-Protected, Isolated RS-485/RS-422
Data Interfaces
Ordering Information (continued)
PART†
TEMP. RANGE PIN-PACKAGE
MAX1480ECCPI 0°C to +70°C 28 Wide Plastic DIP
MAX1480ECEPI -40°C to +85°C 28 Wide Plastic DIP
MAX1490EACPG 0°C to +70°C 24 Wide Plastic DIP
MAX1490EAEPG -40°C to +85°C 24 Wide Plastic DIP
MAX1490EBCPG 0°C to +70°C 24 Wide Plastic DIP
MAX1490EBEPG -40°C to +85°C 24 Wide Plastic DIP
† Data rate for A parts is up to 2500kbps. Data rate for C parts is
up to 250kbps.
Selector Guide
PART
HALF/
FULL
DUPLEX
DATA
RATE
(Mbps)
SLEW-
RATE
LIMITED
MAX1480EA
Half
2.5
No
MAX1480EC
Half
0.25
Yes
MAX1490EA
Full
2.5
No
MAX1490EB
Full
0.25
Yes
This device is constructed using a unique set of packaging
techniques that impose a limit on the thermal profile the device
can be exposed to during board-level solder attach and
rework. Maxim recommends the use of the solder profiles rec-
ommended in the industry-standard specification, JEDEC
020A, paragraph 7.6, Table 3 for IR/VPR and Convection
Reflow processes. Preheating, per this standard, is required.
Hand or wave soldering is not recommended.
Pin Configurations (continued)
TOP VIEW
MAX1480EA/
MAX1480EC
VCC1 1
VCC2 2
D1 3
D2 4
GND1 5
FS 6
SD 7
VCC3 8
DI 9
VCC4 10
DE 11
GND2 12
MAX845
28 AC1
27 AC2
26 ISO VCC1
25 B
24 ISO RO DRV
MAX487E
MAX1487E 23 A
22 ISO DI IN
21 ISO DE IN
20 ISO COM1
19 ISO DI DRV
18 ISO VCC2
17 ISO DE DRV
RO 13
VCC5 14
ISOLATION BARRIER
16 ISO COM2
15 ISO RO LED
DIP
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600___________________ 19
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.