DS8113 Datasheet, PDF (17/17 Pages) Maxim Integrated Products – Smart Card Interface

Smart Card Interface
Revision History
REVISION REVISION
NUMBER DATE
DESCRIPTION
0
1/08 Initial release.
In the Recommended DC Operating Conditions table, changed I/OIN,
AUX1IN/AUX2IN specs to reference VDD rather than VCC and corrected VOH to µA.
1
2/08
In the Pin Description, removed references to active low from the PRES
description.
PAGES
CHANGED
—
5
7
EMVCo approval of the interface module (IFM) contained in this Terminal shall mean only that the IFM has been tested in accordance and for sufficient
conformance with the EMV Specifications, Version 3.1.1, as of the date of testing. EMVCo approval is not in any way an endorsement or warranty regarding
the completeness of the approval process or the functionality, quality or performance of any particular product or service. EMVCo does not warrant any
products or services provided by third parties, including, but not limited to, the producer or provider of the IFM and EMVCo approval does not under any
circumstances include or imply any product warranties from EMVCo, including, without limitation, any implied warranties of merchantability, fitness for pur-
pose, or noninfringement, all of which are expressly disclaimed by EMVCo. All rights and remedies regarding products and services which have received
EMVCo approval shall be provided by the party providing such products or services, and not by EMVCo and EMVCo accepts no liability whatsoever in
connection therewith.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 17
© 2008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.