DS8113 Datasheet, PDF (1/17 Pages) Maxim Integrated Products – Smart Card Interface

Rev 1; 2/08
Smart Card Interface
General Description
The DS8113 smart card interface is a low-cost, analog
front-end for a smart card reader, designed for all ISO
7816, EMV™, and GSM11-11 applications. The DS8113
supports 5V, 3V, and 1.8V smart cards. The DS8113
provides options for low active- and stop-mode power
consumption, with as little as 10nA stop-mode current.
The DS8113 is designed to interface between a system
microcontroller and the smart card interface, providing
all power supply, ESD protection, and level shifting
required for IC card applications.
An EMV Level 1 certified library (written for the MAXQ2000
microcontroller) and hardware reference design is
available. Contact Maxim technical support at
[e-mail] regarding requirements for
other microcontroller platforms. An evaluation kit,
DS8113-KIT, is available to aid in prototyping and
evaluation.
Applications
Consumer Set-Top Boxes
Access Control
Banking Applications
POS Terminals
Debit/Credit Payment Terminals
PIN Pads
Automated Teller Machines
Telecommunications
Pay/Premium Television
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
DS8113-RNG+
-40°C to +85°C
28 SO
Note: Contact the factory for availability of other variants and
package options.
+Denotes a lead-free package.
Selector Guide appears at end of data sheet.
Features
o Analog Interface and Level Shifting for IC Card
Communication
o 8kV (min) ESD (IEC) Protection on Card Interface
o Ultra-Low Stop-Mode Current, Less Than 10nA
Typical
o Internal IC Card Supply-Voltage Generation:
5.0V ±5%, 80mA (max)
3.0V ±8%, 65mA (max)
1.8V ±10%, 30mA (max)
o Automatic Card Activation and Deactivation
Controlled by Dedicated Internal Sequencer
o I/O Lines from Host Directly Level Shifted for
Smart Card Communication
o Flexible Card Clock Generation, Supporting
External Crystal Frequency Divided by 1, 2, 4, or 8
o High-Current, Short-Circuit and High-Temperature
Protection
o Low Active-Mode Current
Pin Configuration
TOP VIEW
CLKDIV1 1
CLKDIV2 2
5V/3V 3
PGND 4
CP2 5
VDDA 6
CP1 7
VUP 8
PRES 9
PRES 10
I/O 11
AUX2 12
AUX1 13
CGND 14
DS8113
28 AUX2IN
27 AUX1IN
26 I/OIN
25 XTAL2
24 XTAL1
23 OFF
22 GND
21 VDD
20 RSTIN
19 CMDVCC
18 1_8V
17 VCC
16 RST
15 CLK
SO
EMV is a trademark owned by EMVCo LLC.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be
simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.