MAX1086 Datasheet, PDF (13/15 Pages) Maxim Integrated Products – 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23

150ksps, 10-Bit, 2-Channel Single-Ended, and
1-Channel True-Differential ADCs in SOT23
CNVST
1
4
SCLK
8
12
16
DOUT
B9
MSB
B8
B7
B6
B5
B4
B3
B2
B1
B0
LSB
S1
S0
HIGH-Z
SAMPLING INSTANT
Figure 9b. QSPI Interface Timing Sequence (CPOL = CPHA = 0)
V_DD
V_DD
SCLK
DOUT
CNVST
MAX1086–
MAX1089
SCK
SDI
I/O
PIC16/PIC17
GND
GND
Figure 10a. SPI Interface Connection for a PIC16/PIC17 Controller
Definitions
Integral Nonlinearity
Integral nonlinearity (INL) is the deviation of the values
on an actual transfer function from a straight line. This
straight line can be either a best-straight-line fit or a line
drawn between the endpoints of the transfer function,
once offset and gain errors have been nullified. The sta-
tic linearity parameters for the MAX1086–MAX1089 are
measured using the endpoint method.
Differential Nonlinearity
Differential nonlinearity (DNL) is the difference between
an actual step-width and the ideal value of 1LSB. A
DNL error specification of less than 1LSB guarantees
no missing codes and a monotonic transfer function.
CNVST
1
SCLK
1ST BYTE READ
4
8
2ND BYTE READ
12
16
DOUT
B9
MSB
B8
B7
B6
B5
B4 B3
B2
B1
B0
LSB
S1
S0
HIGH-Z
SAMPLING INSTANT
Figure 10b. SPI Interface Timing with PIC16/PIC17 in Master Mode (CKE = 1, CKP = 0, SMP = 0, SSPM3 - SSPM0 = 0001)
______________________________________________________________________________________ 13