MAX14840E_15 Datasheet, PDF (10/16 Pages) Maxim Integrated Products – 40Mbps, +3.3V, RS-485 Half-Duplex Transceivers

MAX14840E/MAX14841E 40Mbps, +3.3V, RS-485 Half-Duplex Transceivers
Pin Configurations
TOP VIEW
VCC B
87
A GND
65
MAX14840E
MAX14841E
+
*EP
1 234
RO RE DE DI
TDFN
*CONNECT EXPOSED PAD (EP) TO GND.
RO 1
RE 2
DE 3
DI 4
MAX14840E
MAX14841E
8 VCC
7B
6A
5 GND
SO
Pin Descriptions
PIN
NAME
FUNCTION
1
RO Receiver Output. See the Function Table.
Active-Low Receiver-Output Enable. Drive RE low to enable RO. RO is high impedance when RE is high.
2
RE Drive RE high and DE low to enter low-power shutdown mode. RE is a hot-swap input (see the Hot-Swap
Capability section for details).
Driver-Output Enable. Drive DE high to enable driver outputs. These outputs are high impedance when DE
3
DE is low. Drive RE high and DE low to enter low-power shutdown mode. DE is a hot-swap input (see the Hot-
Swap Capability section for details).
4
DI
Driver Input. With DE high, a low on DI forces the A output low and the B output high. Similarly, a high on
DI forces the A output high and the B output low.
5
GND Ground
6
A
Noninverting Receiver Input and Noninverting Driver Output
7
B
Inverting Receiver Input and Inverting Driver Output
8
V_CC Positive Supply Voltage Input. Bypass V_CC with a 0.1FF ceramic capacitor to GND.
—
EP Exposed Pad (TDFN Only). Connect EP to GND.
www.maximintegrated.com
Maxim Integrated │  10