MAX9257 Datasheet, PDF (1/52 Pages) Maxim Integrated Products – Fully Programmable Serializer/Deserializer with UART/I2C Control Channel

19-1044; Rev 1; 3/09
EVAALVUAAILTAIOBNLEKIT
Fully Programmable Serializer/Deserializer
with UART/I²C Control Channel
General Description
The MAX9257 serializer pairs with the MAX9258 deseri-
alizer to form a complete digital video serial link. The
MAX9257/MAX9258 feature programmable parallel data
width, parallel clock frequency range, spread spectrum,
and preemphasis. An integrated control channel trans-
fers data bidirectionally at power-up during video blank-
ing over the same differential pair used for video data.
This feature eliminates the need for external CAN or LIN
interface for diagnostics or programming. The clock is
recovered from input serial data at MAX9258, hence
eliminating the need for an external reference clock.
The MAX9257 serializes 10, 12, 14, 16, and 18 bits with
the addition of two encoding bits for AC-coupling. The
MAX9258 deserializer links with the MAX9257 to deseri-
alize a maximum of 20 (data + encoding) bits per
pixel/parallel clock period for a maximum serial-data
rate of 840Mbps. The word length can be adjusted to
accommodate a higher pixel/parallel clock frequency.
The pixel clock can vary from 5MHz to 70MHz, depend-
ing on the serial-word length. Enabling parity adds two
parity bits to the serial word. The encoding bits reduce
ISI and allow AC-coupling.
The MAX9258 receives programming instructions from
the electronic control unit (ECU) during the control
channel and transmits to the MAX9257 over the serial
video link. The instructions can program or update the
MAX9257, MAX9258, or an external peripheral device,
such as a camera. The MAX9257 communicates with
the peripheral device with I²C or UART.
The MAX9257/MAX9258 operate from a +3.3V core
supply and feature separate supplies for interfacing to
+1.8V to +3.3V logic levels. These devices are avail-
able in 40-lead TQFN or 48-pin LQFP packages. These
devices are specified over the -40°C to +105°C temper-
ature range.
Applications
Automotive Cameras
Industrial Cameras
Navigation Systems Display
In-Vehicle Entertainment Systems
Features
♦ 10/12/14/16/18-Bit Programmable Parallel Data
Width
♦ MAX9258 Does Not Require Reference Clock
♦ Parity Protection for Video and Control Channels
♦ Programmable Spread Spectrum
♦ Programmable Rising or Falling Edge for HSYNC,
VSYNC, and Clock
♦ Up to 10 Remotely Programmable GPIO on
MAX9257
♦ Automatic Resynchronization in Case of Loss of
Lock
♦ MAX9257 Parallel Clock Jitter Filter PLL with
Bypass
♦ DC-Balanced Coding Allows AC-Coupling
♦ 5 Levels of Preemphasis for Up to 20m STP Cable
Drive
♦ Integrity Test Using On-Chip Programmable
PRBS Generator and Checker
♦ LVDS I/O Meet ISO 10605 ESD Protection (±10kV
Contact and ±30kV Air Discharge)
♦ LVDS I/O Meet IEC 61000-4-2 ESD Protection
(±8kV Contact and ±20kV Air Discharge)
♦ LVDS I/O Meet ±200V Machine Model ESD
Protection
♦ -40°C to +105°C Operating Temperature Range
♦ Space-Saving, 40-Pin TQFN (5mm x 5mm) with
Exposed Pad or 48-Pin LQFP Packages
♦ +3.3V Core Supply
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX9257GTL/V+ -40°C to +105°C 40 TQFN-EP*
MAX9257GCM/V+ -40°C to +105°C 48 LQFP
MAX9258GCM/V+ -40°C to +105°C 48 LQFP
/V denotes an automotive qualified part.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Typical Operating Circuit and Pin Configurations appear at
end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.