English
Language : 

MAX6851 Datasheet, PDF (1/37 Pages) Maxim Integrated Products – 2-Wire Interfaced, 7-, 14-, and 16-Segment Alpha numeric Vacuum -Fluorescent
19-2746; Rev 0; 1/03
2-Wire Interfaced, 7-, 14-, and 16-Segment Alpha-
numeric Vacuum-Fluorescent Display Controller
General Description
The MAX6851 compact vacuum-fluorescent display
(VFD) controller provides microprocessors with the mul-
tiplex timing for 7-segment, 14-segment, or 16-segment
alphanumeric VFD displays up to 96 characters and
controls industry-standard, shift-register, high-voltage
grid/anode VFD tube drivers. The device supports dis-
play tubes using either one or two digits per grid, as
well as universal displays. Hardware is included to sim-
plify the generation of cathode bias and filament sup-
plies and to provide up to five logic outputs, including a
buzzer driver. The MAX6851 provides an internal cross-
point switch to match any tube-driver, shift-register
grid/anode order, and is compatible with both chip-in-
glass and external tube drivers.
The MAX6851 includes an ASCII 104-character font,
multiplex scan circuitry, and static RAM that stores
digit, cursor, and annunciator data, as well as font data
for 24 user-definable characters. The display intensity
can be adjusted by an internal 16-step digital bright-
ness control. The device also includes separate annun-
ciator and cursor control with automatic blinking, as
well as a low-power shutdown mode.
The MAX6851 provides timing to generate the PWM
waveforms to drive the tube filament from a DC supply.
The filament drive is synchronized to the display multi-
plexing to eliminate beat artifacts.
For a high-speed SPI™/QSPI™/MICROWIRE™ inter-
faced version, refer to the MAX6850 data sheet.
Display Modules
Retail POS Displays
Weight and Tare
Displays
Bar Graph Displays
Applications
Industrial Controllers
White Goods
Professional Audio
Equipment
Pin Configuration and Functional Diagram appear at end of
data sheet.
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Features
o 400kbps I2C-Compatible Serial Interface
o 2.7V to 3.6V Operation
o Controls Up to 48 Grids of 7-Segment, 14-Segment,
or 16-Segment Alphanumeric Digits
o One Digit and Two Digits per Grid and Universal
Displays Supported
o 16-Step Digital Brightness Control
o Built-In ASCII 104-Character Font
o 24 User-Definable Characters
o Up to Four Annunciators per Grid with Automatic
Blinking Control
o Separate Cursor Control with Automatic Blinking
o Filament Drive Full-Bridge Waveform Synthesis
o Charge-Pump Drive Output to Generate Cathode
Bias Supply
o Buzzer Tone Generator with Single-Ended or
Push-Pull Driver
o Up to Five General-Purpose Logic Outputs
o 11µA Low-Power Shutdown (Data Retained)
o 16-Pin QSOP Package
PART
MAX6851AEE
Ordering Information
TEMP RANGE
-40°C to +125°C
PIN-PACKAGE
16 QSOP
Typical Application Circuit
CHIP-ON-GLASS VFD
0.1µF
VFD SUPPLY VOLTAGE
MICROCONTROLLER
SDA
SCL
VFCLK
MAX6851
VFDOUT
SDA
VFLOAD
SCL
VFBLANK
OSC2
OSC1
GND
56pF
10kΩ
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.