|
MAX3107_15 Datasheet, PDF (1/52 Pages) Maxim Integrated Products – SPI/I2C UART with 128-Word FIFOs | |||
|
MAX3107
EVALUATION KIT AVAILABLE
SPI/I2C UART with 128-Word FIFOs
General Description
The MAX3107 is an advanced universal asynchronous
receiver-transmitter (UART) with 128 words each of
receive and transmit first-in/first-out (FIFO) that can be
controlled through I2C or high-speed SPI. The 2x and
4x rate modes allow a maximum of 24Mbps data rates.
A phase-locked loop (PLL), prescaler, and fractional
baud-rate generator allow for high-resolution baud-rate
programming and minimize the dependency of baud rate
on reference clock frequency.
Autosleep and shutdown modes help reduce power con-
sumption during periods of inactivity. A low 640µA (typ)
supply current and tiny 24-pin TQFN (3.5mm x 3.5mm)
package make the MAX3107 ideal for low-power portable
devices.
Integrated logic-level translation on the controller and
transceiver (RX/TX and RTS/CTS) interfaces enable use
with a wide selection of RS-232/RS-485 transceivers.
Automatic hardware and software flow control with select-
able FIFO interrupt triggering offloads low-level activity
from the host controller. Automatic half-duplex transceiver
control with programmable setup and hold times allow
the MAX3107 to be used in high-speed applications, for
example Profibus-DP.
The MAX3107 is ideal for use in portable devices,
industrial, and automotive applications. The MAX3107 is
available in a 24-pin SSOP package and a 24-pin TQFN
package. It is specified over the -40°C to +85°C extended
ambient temperature range.
Applications
ââ Portable Devices
ââ Industrial Control Systems
ââ Fieldbus Networks
ââ Automotive Infotainment Systems
ââ Medical Systems
ââ Point-of-Sale Systems
ââ HVAC or Building Control
Benefits and Features
ââ Bridges an SPI/MICROWIRE or I2C Microprocessor
Bus to an Asynchronous Interface Such as RS-485,
RS-232, or IrDASM
⢠SIR- and MIR-Compliant IrDA Encoder/Decoder
⢠Line Noise Indication Ensures Data Link Integrity
ââ Saves Up to 23% Board Space
⢠24-Pin TQFN (3.5mm x 3.5mm) and SSOP Packages
ââ Integrated Internal Oscillator Eliminates the Need for
an External Oscillator and Reduces the BOM Cost
⢠Integrated PLL and Divider
ââ Fast Data Rates Allow Maximum System Flexibility
Across Interface Standards
⢠24Mbps (max) Data Rate
⢠Fractional Baud-Rate Generator
⢠SPI Up to 26MHz Clock Rate
ââ Deep, 128-Word Buffer and Automated Control
Features Help Offload Activity on the Microcontroller
⢠Auto Transceiver Direction Control
⢠Half-Duplex Echo Suppression
⢠Auto RTS/CTS and XON/XOFF Flow Control
⢠9-Bit Multidrop-Mode Data Filtering
-- Special Character Detection
-- GPIO-Based Character Detection
-- Four Flexible GPIOs
ââ Power Management Control Features Minimize
Power Consumption for Portable Applications
⢠+2.35V to +3.6V Supply Range
-- Low 640μA (typ) Supply Current at 1Mbaud and
20MHz Clock
⢠Shutdown and Autosleep Modes
-- Low 20μA (typ) Shutdown Power
ââ Logic-Level Translation on the Controller and
Transceiver Interfaces (Down to 1.7V) Ensure
System Compatibility
ââ Register Compatible with MAX3108, MAX3109,
MAX14830
Functional Diagram and Ordering Information appear at
end of data sheet.
19-5014; Rev 7; 5/15
|
▷ |