MAX1607_07 Datasheet, PDF (1/10 Pages) Maxim Integrated Products – USB Current-Limited Switch in Pin-Compatible Package

19-1544; Rev 2; 09/07
USB Current-Limited Switch
in Pin-Compatible Package
General Description
The MAX1607 is a current-limited 60mΩ switch with
built-in fault blanking. Its accurate, preset 0.7A to 1.0A
current limit makes it ideal for USB applications. Its low
quiescent supply current (14µA) and standby current
(1µA) conserve battery power in portable applications.
The MAX1607 operates with inputs from +2.7V to
+5.5V, making it ideal for both 3V and 5V systems.
An overcurrent signal (OC) notifies the microprocessor
that the internal current limit has been reached. A 10ms
overcurrent-blanking feature allows momentary faults
(such as those caused when hot-swapping into a
capacitive load) to be ignored, thus preventing false
alarms to the host system. This blanking also prevents
an OC signal from being issued when the device is
powering up.
The MAX1607 has several safety features to ensure that
the USB port is protected. Built-in thermal-overload pro-
tection limits power dissipation and junction temperature.
The device also has accurate internal current-limiting
circuitry to protect the input supply against overload.
The MAX1607 is a pin-compatible upgrade to Texas
Instruments’ TPS2014, TPS2015, and TPS2041 for USB
applications. The same die is available in a space-sav-
ing 10-pin µMAX^® package (MAX1693) and can be
used for next-generation designs. The MAX1694 is sim-
ilar to the MAX1693, but it has a built-in latch that turns
off the power switch in case of a long-term short-
circuit condition.
The MAX1607 is also offered in a 10-pin TDFN package
(not pin compatible with Texas Instruments TPS2014,
TPS2015, and TPS2041 for USB applications).
Applications
Notebook Computers USB Hubs
USB Ports
Docking Stations
Pin Configurations
TOP VIEW
Features
♦ SO Package is Pin Compatible with TPS2014,
TPS2015, and TPS2041
♦ Accurate Current Limit (0.7A min, 1.0A max)
♦ Guaranteed 0.75A Short-Circuit Protection
♦ 10ms Internal OC Blanking Timeout
♦ No Overcurrent (OC) Signal During Power-Up
♦ 125mΩ max High-Side MOSFET
♦ 500mA Continuous Current
♦ Short-Circuit and Thermal Protection with
Overcurrent Logic Output
♦ 1ms Start-Up Time
♦ Undervoltage Lockout
♦ 14µA Quiescent Supply Current
♦ 1µA max Standby Supply Current
♦ +2.7V to +5.5V Supply Range
♦ UL Recognized #E211935
Ordering Information
PART
TEMP RANGE
MAX1607ESA -40°C to +85°C
MAX1607ETB+ -40°C to +85°C
*EP = Exposed paddle.
+Denotes a lead-free package.
PIN-
PACKAGE
8 SO
10 TDFN-EP*
PKG
CODE
S8-5
T1033-1
Typical Operating Circuit
INPUT
+2.7V TO +5.5V
IN
OUT
OUTPUT
GND 1
8 OUT
MAX1607
IN 2
IN 3
EN 4
MAX1607
7 OUT
6 OUT
5 OC
SO
Pin Configurations continued at end of data sheet.
OFF
ON
OC
EN
GND
µMAX is a registered trademark of Maxim Integrated Products, Inc.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.