English
Language : 

MAX14778 Datasheet, PDF (1/15 Pages) Maxim Integrated Products – Dual 25V Above- and Below-the-Rails 4:1 Analog Multiplexer
19-5929; Rev 0; 6/11
EVALUATION KIT AVAILABLE
MAX14778
Dual ±25V Above- and Below-the-Rails
4:1 Analog Multiplexer
General Description
The MAX14778 dual 4:1 analog multiplexer supports
analog signals up to Q25V with a single 3.0 to 5.5V
supply. Each multiplexer has separate control inputs to
allow independent switching, making the device ideal for
multiplexing different communications signals with the
same connector pins. Extended ESD protection of Q6kV
(Human Body Model) enable direct interfacing to cables
and connectors.
The MAX14778 features a low 1.5I (max) on-resistance
and 3mI (typ) flatness to maximize signal integrity over
the entire common-mode voltage range. Each multiplex-
er can carry up to 300mA of continuous current through
the multiplexer in either direction.
The MAX14778 supports switching of full-speed USB 1.1
signals (12Mbps) and RS-485 data rates of up to 20Mbps.
The MAX14778 is available in a 20-pin (5mm x 5mm)
TQFN package and is specified over the -40NC to +85NC
extended temperature range.
Applications
RS-485/RS-232/USB 1.1 Multiplexing
POS Peripherals
Handheld Industrial Devices
Communication Systems
Audio/Data Multiplexing
Connector Sharing
Gaming Machines
Features
S ±25V Signal Range
S Single 3.0V to 5.5V Supply
S Two Independent Multiplexers
S 1.5I RON (max)
S 3mI RON Flatness (typ)
S 300mA Maximum Current Through Multiplexer
S 78pF Input Capacitance
S 75MHz Large-Signal Bandwidth
S Break-Before-Make Operation
S Extended ESD Protection on A_ and B_ Pins
 Q6kV Human Body Model (HBM)
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX14778.related.
Functional Diagram
ENA SA0 SA1
CONTROL A
A0
A1
A2
A3
B0
B1
B2
B3
VDD
VP
BIAS
GENERATION
VN
MAX14778
ACOM
BCOM
CONTROL B
ENB SB0 SB1
GND
����������������������������������������������������������������� Maxim Integrated Products   1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.