|
MAX14591_14 Datasheet, PDF (1/13 Pages) Maxim Integrated Products – High-Speed, Open-Drain Capable Logic-Level Translator | |||
|
EVALUATION KIT AVAILABLE
MAX14591
High-Speed, Open-Drain Capable
Logic-Level Translator
General Description
The MAX14591 is a dual-channel, bidirectional logic-
level translator with the level shifting necessary to allow
data transfer in a multivoltage system. Externally applied
voltages, VCC and VL, set the logic levels on either side
of the device. A logic signal present on the VL side of the
device appears as the same logic signal on the VCC side
of the device, and vice-versa.
The device is optimized for the I2C bus as well as the
management data input/output (MDIO) bus where often
high-speed, open-drain operation is required. When TS
is high, the device allows the pullup to be connected to
the I/O port that has the power. This allows continuous
I2C operation on the powered side without any disruption
while the level translation function is off.
The part is specified over the extended -40NC to +85NC
temperature range, and is available in 8-bump WLP and
8-pin TDFN packages.
Applications
Devices with I2C Communication
Devices with MDIO Communication
General Logic-Level Translation
Benefits and Features
S Meets Industry Standards
ï² I2C Requirements for Standard, Fast, and
High* Speeds
ï² MDIO Open Drain Above 4MHz*
S Allows Greater Design Flexibility
ï² Down to 0.9V Operation on VL Side
ï² Supports Above 8MHz Push-Pull Operation
S Offers Low Power Consumption
ï² 23µA (typ) VCC Supply Current
ï² 0.5µA (typ) VL Supply Current
S Provides High Level of Integration
ï² Pullup Resistor Enabled with One Side
Power Supply when TS Is High
ï² 12kI (max) Internal Pullup
ï² Low Transmission Gate RON: 17I (max)
S Saves Space
ï² 8-Bump, 0.4mm pitch, 0.8mm x 1.6mm WLP
Package
ï² 8-Pin, 2mm x 2mm TDFN Package
*Requires external pullups.
Ordering Information appears at end of data sheet.
VL = +1.2V
+1.2V
EN
SYSTEM
CONTROLLER
SDA
Typical Operating Circuit
0.1µF
1µF
VCC = +3.0V
TS VL
VCC
VL
VCC
*
*
MAX14591
+3V
SYSTEM
IOVL1
VL
*
IOVCC1
SDA
VCC
*
GND
SLK
IOVL2
GND IOVCC2
SLK
GND
* PULLUPS ARE OPTIONAL FOR HIGH-SPEED, OPEN-DRAIN OPERATION.
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integratedâs website at www.maximintegrated.com.
19-6173; Rev 1; 12/14
|
▷ |