MAX13080E Datasheet, PDF (1/24 Pages) Maxim Integrated Products – +5.0V, 15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

19-3590; Rev 1; 4/05
+5.0V, ±15kV ESD-Protected, Fail-Safe,
Hot-Swap, RS-485/RS-422 Transceivers
General Description
The MAX13080E–MAX13089E +5.0V, ±15kV ESD-protect-
ed, RS-485/RS-422 transceivers feature one driver and
one receiver. These devices include fail-safe circuitry,
guaranteeing a logic-high receiver output when receiver
inputs are open or shorted. The receiver outputs a logic-
high if all transmitters on a terminated bus are disabled
(high impedance). The MAX13080E–MAX13089E include
a hot-swap capability to eliminate false transitions on the
bus during power-up or hot insertion.
The MAX13080E/MAX13081E/MAX13082E feature
reduced slew-rate drivers that minimize EMI and
reduce reflections caused by improperly terminated
cables, allowing error-free data transmission up to
250kbps. The MAX13083E/MAX13084E/MAX13085E
also feature slew-rate-limited drivers but allow transmit
speeds up to 500kbps. The MAX13086E/MAX13087E/
MAX13088E driver slew rates are not limited, making
transmit speeds up to 16Mbps possible. The
MAX13089E slew rate is pin selectable for 250kbps,
500kbps, and 16Mbps.
The MAX13082E/MAX13085E/MAX13088E are intended
for half-duplex communications, and the MAX13080E/
MAX13081E/MAX13083E/MAX13084E/MAX13086E/
MAX13087E are intended for full-duplex communica-
tions. The MAX13089E is selectable for half-duplex or
full-duplex operation. It also features independently
programmable receiver and transmitter output phase
through separate pins.
The MAX13080E–MAX13089E transceivers draw 1.2mA
of supply current when unloaded or when fully loaded
with the drivers disabled. All devices have a 1/8-unit
load receiver input impedance, allowing up to 256
transceivers on the bus.
The MAX13080E/MAX13083E/MAX13086E/MAX13089E
are available in 14-pin PDIP and 14-pin SO packages.
The MAX13081E/MAX13082E/MAX13084E/MAX13085E/
MAX13087E/MAX13088E are available in 8-pin PDIP and
8-pin SO packages. The devices operate over the com-
mercial, extended, and automotive temperature ranges.
Applications
Utility Meters
Lighting Systems
Industrial Control
Telecom
Security Systems
Instrumentation
Profibus
Features
♦ +5.0V Operation
♦ Extended ESD Protection for RS-485/RS-422 I/O Pins
±15kV Human Body Model
♦ True Fail-Safe Receiver While Maintaining
EIA/TIA-485 Compatibility
♦ Hot-Swap Input Structures on DE and RE
♦ Enhanced Slew-Rate Limiting Facilitates Error-
Free Data Transmission
(MAX13080E–MAX13085E/MAX13089E)
♦ Low-Current Shutdown Mode (Except
MAX13081E/MAX13084E/MAX13087E)
♦ Pin-Selectable Full-/Half-Duplex Operation
(MAX13089E)
♦ Phase Controls to Correct for Twisted-Pair
Reversal (MAX13089E)
♦ Allow Up to 256 Transceivers on the Bus
♦ Available in Industry-Standard 8-Pin SO Package
Ordering Information
PART
MAX13080ECPD
MAX13080ECSD
MAX13080EEPD
MAX13080EESD
MAX13080EAPD
MAX13080EASD
TEMP RANGE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +125°C
-40°C to +125°C
PIN-
PACKAGE
14 PDIP
14 SO
14 PDIP
14 SO
14 PDIP
14 SO
PKG
CODE
P14-3
S14-2
P14-3
S14-2
P14-3
S14-2
Ordering Information continued at end of data sheet.
Selector Guide, Pin Configurations, and Typical Operating
Circuits appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.