DSTINIS400 Datasheet, PDF (1/11 Pages) Maxim Integrated Products – Sockets Evaluation Board

www.maxim-ic.com
GENERAL DESCRIPTION
The TINI^® sockets boards are motherboards
designed to host the corresponding TINI evaluation
module. The combination of the two boards allows
full evaluation of the features of the target
microprocessor. To evaluate the DS80C400, order
both a DSTINIm400 and a DSTINIs400.
Although various boards support different evaluation
modules, the most popular is the DSTINIs400. It
includes a 144-pin SODIMM connector and provides
1-Wire^®, CAN2.0B, serial, and a 10/100 Ethernet
PHY for connecting the TINIm400 to the physical
world.
The DSTINIm400 and DSTINIs400 are fully
assembled and tested circuit boards. When used
together they form a complete evaluation system for
the DS80C400 network microcontroller. The
DSTINIm400 module includes the DS80C400
network microcontroller, a real-time clock, 1MB flash,
1MB static RAM, and support for an external
Ethernet PHY for connecting to a wide variety of
networks. The circuit board is designed as a module
to be plugged into the 144-pin SODIMM connector on
the DSTINIS400.
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
TINI and 1-Wire are registered trademarks of Dallas
Semiconductor.
DSTINIs400/DSTINIs-00x
Sockets Evaluation Board
FEATURES
§ Hosts the TINI Runtime Environment in Validated
Hardware Design (in Conjunction with the
DSTINIm400)
§ 10/100 Base-T Ethernet Port
§ Two Serial Ports
§ Dual 1-Wire Network Ports
§ CAN2.0B Port
§ 5.0V Single-Supply Operation (DSTINIm400)
§ Fully Assembled and Tested Design
ORDERING INFORMATION
PART
INPUT
VOLTAGE*
USED WITH
MODULE
DSTINIs400
5V DC
regulated
DSTINIm400
DSTINIs-005
5V DC
regulated
DSTINI1-1MG,
DSTINI1-512
DSTINIs-006
9V to 18V
DC
DSTINI1-1MG,
DSTINI1-512
*The user must supply an external power supply.
DIMENSIONS
12cm x 10cm
16cm x 10cm
16cm x 10cm
COMPONENT LIST
DESIGNATION QTY
DESCRIPTION
C1
C2, C4–C6
C3, C7, C9, C13,
C15, C26, C28,
C30, C38
C12, C14, C17,
C19, C25, C27,
C29, C33, C37
C8
C10, C31, C32,
C34–C36
C11
1 47pFcapacitor (1206)
4 47mF capacitors (1206)
9 100nF capacitors (1206)
9 10nF capacitors (1206)
1 220nF capacitor (1206)
6 1.0mF capacitors (1206)
1 4.7mF capacitor (1206)
1 of 11
REV: 110603