DS1086LPMB1 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – DS1086LPMB1 Peripheral Module

19-6318; Rev 0; 5/12
DS1086LPMB1 Peripheral Module
General Description
The DS1086LPMB1 peripheral module provides the
necessary hardware to interface the DS1086L 3.3V
spread-spectrum EconOscillatorK to any system that
utilizes PmodK-compatible expansion ports configurable
for I²C communication. The DS1086L is a program-
mable clock generator that produces a spread-spectrum
(dithered) square-wave output of frequencies from
130kHz to 66.6MHz. The selectable dithered output
reduces radiated-emission peaks by dithering the
frequency 0.5%, 1%, 2%, 4%, or 8% below the
programmed frequency. The DS1086L has a power-down
mode and an output-enable control for power-sensitive
applications.
Refer to the DS1086L IC data sheet for detailed informa-
tion regarding operation of the IC.
Features
S User-Programmable 130kHz to 66.6MHz Square
Wave
S No External Timing Components Required
S 6-Pin Pmod-Compatible Connector (I²C)
S Example Software Written in C for Portability
S Secondary Header Allows Daisy-Chaining of
Additional Modules on the I²C Bus
S Output Header Provides Access to Control Signals
for External Circuitry
S RoHS Compliant
S Proven PCB Layout
S Fully Assembled and Tested
Ordering Information appears at end of data sheet.
DS1086LPMB1 Peripheral Module
EconOscillator is a trademark of Maxim Integrated Products,
Inc.
Pmod is a trademark of Digilent Inc.
__________________________________________________________________ Maxim Integrated Products  1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.