TL21W02D1 Datasheet, PDF (9/14 Pages) Marktech Corporate – LED Lamps InGaN and Phosphor

TL21W02-D1(T34
11. Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed
that these solvents have no effect on semiconductor devices in our dipping test (under the recommended
conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition,
using condition and etc.
Recommended cleaning solvents
ASAHI CLEAN AK-225AES: (made by ASAHI GLASS)
KAO CLEANTHROUGH 750HS: (made by KAO)
PINE ALPHA ST-100S: (made by ARAKAWA CHEMICAL)
12. Tape Specifications
12.1. Product Naming Conventions
The type of package used for shipment is denoted by a symbol suffix after the part number. The method of
classification is as below. (this method, however does not apply to products whose electrical characteristics differ
from standard Toshiba specifications)
Example: TL21W02-D1(T34
Toshiba part number: TL21W02-D1
Tape type: T34 (4-mm pitch)
12.2. Handling Precautions
(1) The tape is antistatic-coated. However, if the tape is charged with excess static electricity, devices might
cling to the tape or waggle in the tape when the cover tape peeled off. Be aware of the following to avoid
this:
Use an ionizer to neutralize the ions when utilizing an automatic mounter.
For transport and temporary storage of devices, use containers (boxes, jigs, bags) that are made with
antistatic materials or materials that dissipate static electricity.
9
2011-10-20
Rev.1.0