TLBD1050 Datasheet, PDF (7/11 Pages) Marktech Corporate – TOSHIBA LED Lamp

Recommended soldering pattern
2.45 1.3 2.45
Unit: mm
2.7
TLBD1050(T20),TLEGD1050(T20)
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. Our
dipping tests (carried out under the recommended conditions) confirm that these solvents have no effect on
semiconductor devices. In selecting the cleaning solvent you will actually use, be sure to take into account
the cleaning conditions and usage conditions.
Cleaning Solvent
ASAHI CLEAN AK-225AES
KAO CLEANTHROUGH 750H
PINE ALPHA ST-100S
TOSHIBA TECHNOCARE
(FRW-17, FRW-1, FRV-100)
Manufacturer
ASAHI GLASS
KAO
ARAKAWA CHEMICAL
GE TOSHIBA SILICONES
Precautions When Mounting
Do not apply force to plastic parts of the LED under high-temperature conditions.
The LED plastic is easily scratched. Avoid friction between plastic parts and hard objects or materials.
When installing the PCB in a product, ensure that the device does not come into contact with other components.
Tape Specifications
This specification lays out the 8 mm pitch embossed-tape packing requirements for 5.2 mm (L) × 5.2 mm (W) ×
4.0 mm (H) size surface-mount LED lamp.
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The method
of classification is as below. (This method, however, does not apply to products whose electrical
characteristics differ from standard Toshiba specifications.)
(1) Tape Type: T20 (8-mm pitch)
(2) Example
TLBD1050
(T20)
Tape type
Toshiba product No.
2. Related Matters
(1) Electro-optical Characteristics
Please refer to the each technical datasheet for electro-optical characteristics of tape packed
products.
(2) Handling Precautions
Tape material protected against static electricity. However, static electricity may occur
depending on quantity of charged static electricity and a device may attach to a tape, or a device
may be unstable when peeling a tape cover.
(a) In process, taping materials may sustain an electrostatic charge, use an ionizer to neutralize
the ions.
(b) For transport and temporary storage of devices, use containers (boxes, jigs, bags) that are
made of anti-static materials or of materials that dissipate electrostatic electricity.
7
2007-5-17