English
Language : 

EZ900_15 Datasheet, PDF (2/6 Pages) Marktech Corporate – Gen II LEDs
Maximum Ratings at TA = 25°C Note 1
DC Forward Current
Peak Forward Current (1/10 duty cycle @ 1 kHz)
LED Junction Temperature
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
CxxxEZ900-Sxx000-2
1000 mA
1250 mA
150°C
5V
-40°C to +100°C
-40°C to +125°C
Typical Electrical/Optical Characteristics at TA = 25°C, If = 350 mA Note 2
Part Number
Forward Voltage (Vf, V)
C450EZ900-Sxx000-2
C460EZ900-Sxx000-2
C470EZ900-Sxx000-2
Min.
2.9
2.9
2.9
Typ.
3.3
3.3
3.3
Max.
3.8
3.8
3.8
Reverse Current
[I(Vr=5V), μA]
Max.
2
2
2
Full Width Half Max
(λD, nm)
Typ.
20
21
22
Mechanical Specifications
Description
P-N Junction Area (μm)
Chip Area (μm)
Chip Thickness (μm)
Top Au Bond Pad (μm) - Qty. 2
Au Bond Pad Thickness (μm)
Back Contact Metal Area (μm)
Back Contact Metal Thickness (μm)
CxxxEZ900-Sxx000-2
Dimensions
Tolerance
850 x 850
± 35
880 x 880
± 35
170
± 25
150 x 150
± 25
3.0
± 1.5
880 x 880
± 35
3.0
± 1.5
Notes:
1. Maximum ratings are package-dependent. The above ratings were determined using a 3.45 x 3.45 mm SMT without an encapsulant
for characterization. Ratings for other packages may differ. The junction temperature should be characterized in a specific package
to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds).See Cree EZBright Applications
Note for assembly-process information.
2. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled
and operated at 350 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given
are within the range of average values expected by the manufacturer in large quantities and are provided for information only. All
measurements were made using a Au-plated TO39 header without an encapsulant. Optical characteristics were measured in an
integrating sphere using Illuminance E.
1200
1000
800
600
Rth j-a = 10 °C/W
Rth j-a = 15 °C/W
400
Rth j-a = 20 °C/W
Rth j-a = 25 °C/W
200
0
25
50
75
100
125
150
175
Ambient Temperature (˚C)
Copyright © 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks, and EZBright. EZ900 and EZ are trademarks of Cree, Inc.
2
CPR3DX Rev. B
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com