60143 Datasheet, PDF (3/12 Pages) Mallory performance club – MSD LS Ignition Control

INSTALLATION INSTRUCTIONS
3
PIN FUNCTION
A ECT
B Sensor Ground
C Coil 2
D Coil 4
E Coil 6
F Coil 8
G 12V Supply
H Battery +
J Ground
K 12V Supply
L Coil 7
M Coil 5
N Coil 3
P Coil 1
R Sensor Ground
S ECT
COLOR
BLACK
BROWN
RED/GREEN
BROWN/GREEN
WHITE/BLUE
VIOLET/BLUE
PINK
RED
BLACK
PINK
RED
GREEN
BLUE
VIOLET
BROWN
YELLOW
2-pin connector connects to Engine Coolant Temp
(ECT) sensor.
Connect to Passenger's side coil connector.
(Coils 2-4-6-8)
Connect to Relay or dedicated fused 30A switch.
Connect to a ground source.
Connect to Driver's side coil connector.
(Coils 1-3-5-7)
2-pin connector connects to ECT sensor
PIN FUNCTION
COLOR
A 12V
PINK
B Ground
C Cam
BROWN
BROWN/WHITE
Connect to Cam/Crank pigtail.
D Crank
ORANGE/YELLOW
E 5V
ORANGE
F Factory Use
BLACK
G Not Used
H Step Retard
PINK
Step Retard is activated when 12V is supplied.
J Launch Rev Limiter* BLUE
When 12V is supplied, the Launch Rev Limiter RPM
value is active. (*Two Step)
K Tach
GRAY
Tach output
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]