PN88862 Datasheet, PDF (2/4 Pages) Mallory performance club – 6LS-2 Harness for EFI Vehicles

2
INSTALLATION INSTRUCTIONS
MAP SENSOR
Disconnect the MAP sensor harness and install the MSD Harness inline. The Gray Connector of the Harness
goes to the MAP sensor. Connect the MAP connector of the 6LS-2 into the connector with a single signal
wire (Figure 2).
Figure 2 Map Sensor Connection.
LS-2 SERIES
CAMSHAFT SENSOR
Locate the Camshaft Sensor and the extension
cable. On LS2/LS7 based engines, the Cam Sensor
is on the front of the block.
Disconnect the extension cable from factory harness
and install the MSD Harness (Black connector)
inline. Connect the Cam Connector of the 6LS-2 to
the connector with a single signal wire.
CAM
SENSOR
OEM CAM
SENSOR
ADAPTER
Figure 3 Camshaft Sensor Location.
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]