6462 Datasheet, PDF (14/24 Pages) Alpha Wire – Customer Specification

14
INSTALLATION INSTRUCTIONS
  GM IGNITIONS  Wiring a Dual Connector Coil.
NOTE: MSD offers a direct plug in harness,
PN 8876, for this coil.
NOTE: Cut and splice the two pink wires (coil
positive) together and connect to orange
wire of MSD. Cut and splice the two white
wires (coil negative) together and connect
to the white of MSD. If the vehicle is not
equipped with a factory tach, there will
only be one white wire.
  GM IGNITIONS  Wiring the 1996 and up single connector coil without harness.
NOTE: MSD offers a direct plug in harness that
makes this a splice free installation.
Harness PN 8877 - 1996-on GM Vehicles.
NOTE: The coil connector is labeled A-B-C.The wire in the A port
is positive (pink). The wires in B and C are coil negative
wires, color will vary by application.
M S D  •  WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]