500E Datasheet, PDF (2/4 Pages) Make-Ps – Single Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
ENVIRONMENTAL SPECIFICATIONS
Operating Temp. Range
Storage Temp. Range
Relative Humidity
Cooling
Min Typ Max Unit/Comments
-30
+75 ^oC; Ambient
-40
+125 ^oC
+95 % Humidity; non-
condensing
Free-Air Convection
PHYSICAL CHARACTERISTICS
Case Size
Case Material
Shield Connection
Flammability
Weight
Unit/Comments
2.0 X 2.0 X 0.4 inches
(50.8 X 50.8 X 10.2 mm)
Black Coated Metal
Negative Output Pin
UL94V-0
2.6 oz.
OUTLINE DRAWING
CASE “A”
.40 [10.2]
.40 [10.2]
.60 [15.2]
0.04 DIA
[1.0]
+Vout N.C. -Vout
BOTTOM
ON/OFF CONTROL
(OPTIONAL) +Vin -Vin
.20 [5.1]
.20 [5.1]
2.00 [50.8]
.80 [20.3]
2.00
SIDE _[50.8]
.60 [15.2]
.90 [22.9]
.22 [5.6]
MIN.
.40
[10.2]
CASE “ A1” (OPTIONAL)
2.00 [50.8]
1.70 [43.2]
.15 [3.8]
.40 [10.2]
1.25 [31.8]
+Vin
+Vout
ON/OFF CONTROL
(OPTIONAL)
BOTTOM N.C.
-Vin
-Vout
.85 [21.6]
.85 [21.6]
0.04 DIA
[1.0]
2.00
SIDE _[50.8]
.18 [4.4]
.15 [3.8]
.22 [5.6]MIN.
.40 [10.2]
Notes:
1. Unless otherwise specified dimensions are in inches (mm).
Tolerances Inches
mm
X.XX = ±0.02 X.X = ±0.5
X.XXX= ±0.010 X.XX = ±0.25
2. Case A pinning is standard. Case A model numbers do not require suffixing.
3. Case A1 pinning is optional. Case A1 model numbers must be suffixed with “A1”. Example: 512S48E-A1
All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified.
External, low ESR, 10 microfarad (minimum) capacitor across input is recommended for operation.
>> 2