500E Datasheet, PDF (1/4 Pages) Make-Ps – Single Output DC/DC Converter

www.make-ps.com
E-mail:[e-mail]
500E series
Single Output
DC/DC Converter
FEATURES
• Up to 70% Efficiency
• Single output, 5 watt converters
• 500 VDC Input / Output Isolation
• Continuous Short Circuit Protection
• Continuous Six-Sided Shielding
• UL1950 Approved, File No. E104645
• CSA 22.2 Approved, File No. LR89494
• >1,300,000 Hours MTBF
DESCRIPTIONS
The 500E series is a family of compact high performance
5 W DC/DC converters that operate over input voltage ranges
of 4.3-6 VDC, 10.3-15.0 VDC, 15.5-22.5 VDC, 20.4-30.0 VDC, 24.2-36.0
VDC and 41.3-60.0 VDC and provide precisely regulated output
voltages of 5V, 12V and 15V.
The -30^oC to +75^oC operating temperature range makes it
ideal for data communication equipment, mobile battery
driven equipment, distributed power systems, telecommunication
equipment, mixed analog/digital subsystems, process/
machine control equipment, computer peripheral systems
industrial robot systems.
OUTPUT CHARACTERISTICS
Output Voltage Set Point
Line Regulation
Load Regulation
Ripple/Noise
Short Circuit Protection
Temperature Coefficient
Min Typ Max Unit/Comments
±3 % Output voltage at
nominal line & FL
±0.3 % Output voltage
measured from
min. input line to
maximum
±0.3 % Output voltage
measured from FL
to no load
20 mV p-p, Nom.Line
@FL, 20MHz B.W.,
using 1 μf bypass
capacitor
Continuous,
Automatic Recovery
±0.01 % per ^oC
INPUT CHARACTERISTICS
Input Voltage
5 VDC Input Models
12 VDC Input Models
24 VDC Input Models
28 VDC Input Models
48 VDC Input Models
Input Filter
Min Typ Max Unit/Comments
4.65 5 5.25
10.9 12 13.2
21.6 24 26.4
25.2 28 30.8
43.2 48 52.8
VDC @ FL
VDC @ FL
VDC @ FL
VDC @ FL
VDC @ FL
Pi Filter
GENERAL CHARACTERISTICS
Switching Frequency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
MTBF (MIL-HBK-217F)
Min Typ Max Unit/Comments
100
kHz
500
VDC, 1 minute
1000
Mohm, 500VDC
70
pF, 100kHz, 1Volt
1.3
Million Hours,
+25^oC, Ground
Benign
>> 1