E3A-JA3A-H11 Datasheet, PDF (5/12 Pages) Magnetrol International, Inc. – Digital E3 Modulevel Liquid Level Displacer Transmitter

AGENCY APPROVALS
AGENCY
CSA
ATEX
MODEL
XEXX-XXXX
with transmitter codes:
XEXX-XXXX
with transmitter codes:
XEXX-XXXX
with transmitter codes:
XEXX-XXXX, EXX-XXXX
with transmitter codes
x11, x13
x21, x23
x31, x33
x41, x43
x51, x53
x61, x63
x15, x17
x25, x27
x35, x37
x45, x47
x55, x57
x65, x67
x11, x13
x21, x23
x31, x33
x41, x43
x51, x53
x61, x63
x1E, x1F, x1G, x1H
x2E, x2F, x2G, x2H
x3E, x3F, x3G, x3H
XEXX-XXXX, EXX-XXXX
with transmitter codes
x1A, x1B, x1C, x1D
x2A, x2B, x2C, x2D
x3A, x3B, x3C, x3D
XEXX-XXXX, EXX-XXXX
with transmitter codes
x1A, x1B, x1C, x1D
x2A, x2B, x2C, x2D
x3A, x3B, x3C, x3D
IEC
XEXX-XXXX, EXX-XXXX x1E, x1F, x1G, x1H
with transmitter codes
x2E, x2F, x2G, x2H
x3E, x3F, x3G, x3H
XEXX-XXXX, EXX-XXXX
with transmitter codes
x1A, x1B, x1C, x1D
x2A, x2B, x2C, x2D
x3A, x3B, x3C, x3D
ΠSee appropriate Installation & Operating Manual for entity parameters
for IS installation.
 On remote electronics housing only, seal is required within 18 inches.
APPROVAL
Explosion Proof 
Class I, Div. 1; Groups B, C, D
Class II, Div. 1; Groups E, F, G
Class III, T5
Type 4X, IP66
Intrinsically Safe
Class I, Div. 1; Groups A, B, C, D
Class II, Div. 1; Groups E, F, G
Class III, T4
Entity Œ
Type 4X, IP66
Suitable for:
Class I, Div. 2; Groups A, B, C, D
Class II, Div. 2; Groups E, F, G
Class III, T4
Type 4X, IP66
Flameproof
ATEX Ex II 1/2 G Ex d IIC T6
EN 60079-0, EN 60079-1,
EN 60079-26
94/9/EC
Intrinsically Safe Œ
ATEX Ex II 1 G Ex ia IIC T4
EN 60079-0, EN 60079-11,
EN 60079-26, EN 60079-27
94/9/EC
Non-Sparking
ATEX Ex II 3 G Ex ic II T6
EN 60079-0
EN 60079-11
94/9/EC
Flameproof
IECEx Ex d IIC T6 Ga/Gb
IEC 60079-0, IEC 60079-1,
IEC 60079-26
Intrinsically Safe Œ
IECEx Ex ia IIC T4 Ga
IEC 60079-0, IEC 60079-11,
IEC 60079-26, IEC 60079-27
These units have been tested to
EN 61326 and are in compliance with
the EMC Directive 2004/108/EC.
5