E3A-JA3A-H11 Datasheet, PDF (4/12 Pages) Magnetrol International, Inc. – Digital E3 Modulevel Liquid Level Displacer Transmitter

SPECIFICATIONS
PERFORMANCE: LEVEL
Reference Conditions
Linearity
Repeatability
Ambient temperature effect
Operating Temp. range:
LCD Temp. Range:
Hysteresis
Response Time
Warm-up Time
SIL
PERFORMANCE:
Water @ +70° F (+21° C) with 14" displacer, wet calibration
±0.20% of full span
±0.05% of full span
Maximum zero shift is 0.017%/°F over ambient temperature range
-40° to +176° F (-40° to +80° C)
-5° to +160° F (-20° to +70° C)
±0.20% of full span
<1 second
<5 seconds
Suitable for use in SIL 2 environments with SFF of 92.3%
INTERFACE LEVEL & DENSITY 
Linearity
Repeatability
Ambient temperature effect
±0.70% of full span
±0.40% of full span
Maximum zero shift is 0.017%/°F over ambient temperature range
1200
Allowable Loop Resistance
vs. Supply Voltage
1000
20.5 mA
 The displacer must always be completely immersed
in process liquid when the E3 is used in interface or
density service. Top mounted models require liquid
level to exceed the top of the displacer by 2" at all
times to ensure optimal performance.
AGENCY APPROVALS
800
Ω
620
600
400
200
0
0
11
10
24 VDC
20
30
40 VDC
AGENCY
FM
MODEL
XEXX-XXXX
with transmitter codes:
XEXX-XXXX
with transmitter codes:
XEXX-XXXX
with transmitter codes:
x11, x12, x13, x14
x21, x22, x23, x24
x31, x32, x33, x34
x41, x42, x43, x44
x51, x52, x53, x54
x61, x62, x63, x64
x15, x16, x17, x18
x25, x26, x27, x28
x35, x36, x37, x38
x45, x46, x47, x48
x55, x56, x57, x58
x65, x66, x67, x68
x11, x12, x13, x14
x21, x22, x23, x24
x31, x32, x33, x34
x41, x42, x43, x44
x51, x52, x53, x54
x61, x62, x63, x64
APPROVAL
Explosion Proof 
Class I, Div. 1; Groups B, C, D
Class II, Div. 1; Groups E, F, G
Class III, T5
Type 4X, IP66
Intrinsically Safe
Class I, Div. 1; Groups A, B, C, D
Class II, Div. 1; Groups E, F, G
Class III, T4
Entity Œ
Type 4X, IP66
Non-Incendive
Class I, Div. 2; Groups A, B, C, D
Class II, Div. 2; Groups E, F, G
Class III, Div. 2; T4
Type 4X, IP66
4