961-20A0-010 Datasheet, PDF (26/36 Pages) Magnetrol International, Inc. – Ultrasonic Single and Dual Point Level Switches

3.6 Agency Approvals
AGENCY
FM & CSA
All transducers (except
Hygienic Connections 3T,
4T & VV from page 33)
comply with Canadian
Electrical Code require-
ments of ANSI/ISA
12.27.01-2003 as a single
seal device
ATEX
INMETRO
APPROVED MODELS
96X-X0A0-X10
96X-X0A0-X11
96X-X0A0-X12
96X-X0A0-X13
96X-X0A1-X10
96X-X0A1-X11
96X-XDA0-X30
96X-XDA0-X31
96X-XDA0-X32
96X-XDA0-X33
96X-XDA1-X30
96X-XDA1-X31
with transducers
9AX-XXXX-XXX or
9MX-XXXX-XXX
96X-XXAX-XXX or
with transducers
9AX-XXXX-XXX or
9MX-XXXX-XXX
96X-50AX-X1X
with transducers
9AX-XXXX-XXX or
9MX-XXXX-XXX
96X-XXAX-XC0
96X-XXAX-XC1
96X-XXAX-XC2
96X-XXAX-XC3
with transducers
9XX-AXXX-XXX
9XX-SXXX-XXX
9XX-BXXX-XXX
9XX-CXXX-XXX
9XX-NXXX-XXX
9XX-KXXX-XXX
96X-50AX-XA0
96X-50AX-XA1
96X-50AX-XA2
96X-50AX-XA3
with transducers:
9XX-AXXX-XXX
9XX-SXXX-XXX
9XX-BXXX-XXX
9XX-CXXX-XXX
9XX-NXXX-XXX
9XX-KXXX-XXX
Consult Factory for
Approved Models
PROTECTION METHOD
Explosion Proof
Non-Incendive
Intrinsically Safe
Flame Proof
Intrinsically Safe
Explosion Proof
Intrinsically Safe
AREA CLASSIFICATION
Class I, Div. 1,Groups B, C, & D
Class II, Div. 1, Groups E, F, & G
Class III, Type 4X, IP 66, T6
Class I, Div. 2,Groups A, B, C, & D
Class II, Div. 2, Groups E, F, & G
Class III, Type 4X, IP 66, T4
Class I, Div. 1,Groups A, B, C, & D
Class II, Div. 1, Groups E, F, & G
Class III, Type 4X, IP 66, T4
Ex II 1/2 G, EEx d IIC T6
Ex II 1 G, EEx ia IIC T5
BR-Ex d IIC T6 IP66W
BR-Ex ia IIC T5 IP66W
These units have been tested to EN 61326 and are
in compliance with the EMC Directive 2004/108/EC.
26
51-646 Echotel^® Model 961 & 962 Ultrasonic Level Switches