1-1586038-4 Datasheet, PDF (95/134 Pages) Tyco Electronics – AMP Soft Shell Pin and Socket Connectors

Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Sealed Connector System
Product Facts —
Sealed Connector System
I Splash-proof design allows
use in areas where high
humidity, intermittent liquid
splashing or foam-in appli-
cations require a sealed
connector for improved
electrical performance
I Wire-to-wire and
wire-to-board
I Dual row, 2 to 10 positions
(even only) and 16 positions
I Mates with all standard
Mini-Universal MATE-N-LOK
connector housings and pin
headers (except Blindmate)
I Positive, polarized keyed
and latched orientation to
ease application
I Utilizes proven Mini-
Universal MATE-N-LOK
contacts with existing
application tooling
I Tested to Sealing Level of
IP56 and IP57 per IEC 60529
I Primarily used in
Appliance, Vending and
HVAC applications
I Compact, durable housings
I Pins and sockets can be
accommodated in the same
housings
I Contacts fully protected in
the housings. Both pins and
sockets can be used on the
power supply wiring
I Fully polarized to provide
proper plug-to-cap mating
incorporating a positive
locking mechanism to
help prevent accidental
disengagement of mated
connectors. Also facilitates
panel mounting
I Free-hanging or panel mount
I Connectors can be mounted
to .031-.079 [0.79-2.00]
thick panels
I With seals, contacts accept
wire size range 26-18 AWG
[.12-.8 mm²] with insulation
diameter of .040-.083
[1.02-2.11]
I .163 [4.14] centerline spacing
I Not for interrupting current
Performance Characteristics
The Mini-Universal MATE-N-LOK
Connector performance characteristics
found on pages 95-96 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Low Level Termination Resistance
20 milliohms max. total resistance
between wire crimps of a mated pin and
socket
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Retention—8 lb. min.
per contact
Durability—20 cycles, mating and
unmating
Technical Documents
Product Specifications
108-1542-2 Mini-Universal MATE-N-LOK
Splash-Proof Seals
108-1542 Mini-Universal MATE-N-
LOK Connectors
108-1543 Mini-Universal MATE-N-
LOK Headers
Application Specification
114-13089 Mini-Universal MATE-N-LOK
Sealed Connector
Instruction Sheets
408-3234 Mini-Universal MATE-N-LOK
Connectors
411-5105 Mini-Universal MATE-N-LOK
Connectors
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
95
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208