5749195-2 Datasheet, PDF (8/32 Pages) Tyco Electronics – AMPLIMITE .050 Series Cable Assemblies, Series III

Shielded Plugs
(Continued)
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued)
Shielded Plug with Unassembled
Standard Termination Covers
B
.050
[1.27]
D
.100
[2.54]
.224
[5.69]
Plug Shell
.588
[14.94]
Terminating Cover
E
.327
[8.31]
Plug Housing
Terminating Cover
Shielded Plug with Assembled
Standard Termination Covers
Materials:
Housing and Covers—
Thermoplastic, 94V-0 rated, black
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin on termination end, all
underplated nickel
Shell—Steel, plated tin-nickel alloy
over nickel over copper
Recommended wire size³ —
28 AWG [0.08-0.09mm²] or
30 AWG [0.05mm²], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Instruction Sheet—408-9427
Shielded Plug with Assembled or Unassembled Standard Termination Covers
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Connectors With Standard Termination Covers
No. of
Pos.
20
26
28
40
50
68
80
100
120
Dimensions
B
D
E
.450
.829
.293
11.43
21.06
7.44
.600
.979
.293
15.24
24.87
7.44
.650
1.029
.293
16.50
26.14
7.44
.950
1.329
.293
24.13
33.76
7.44
1.200
1.579
.293
30.48
40.11
7.44
1.650
2.029
.293
41.91
51.54
7.44
1.950
2.329
.373
49.53
59.16
9.47
2.450
2.829
.373
62.23
71.86
9.47
2.950
3.329
.373
74.93
84.56
9.47
Part Numbers
w/Rails & Latchblocks
w/Latchblocks
5749111-1
5749621-1
1-5749111-0
5749621-2
—
5749621-3
5749111-3
5749621-4
5749111-4
5749621-5
5749111-6
5749621-7
5749111-7
5749621-8
5749111-8
5749621-9
5749111-9
1-5749621-0
Notes: 1. Plug connector requires backshell kit for complete assembly and must use round jacketed cable (discrete
or laminated). Refer to pages 16-19 for backshell kit part numbers.
2. For termination tooling, see pages 28 & 29.
3. The CHAMPOMATOR 2.5 Automatic Termination Machine will accept diameters as low as .023 [0.58].
Catalog 82068
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
13
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]