5749195-2 Datasheet, PDF (13/32 Pages) Tyco Electronics – AMPLIMITE .050 Series Cable Assemblies, Series III

AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches,
Series III
Strain Relief Staple
(1 Supplied)
Cable Supplied
by Customer
Style A
Straight Exit
with Latches
Style A
Angled Exit
with Latches
Style B
Straight Exit
with Latches
Materials:
Backshell—Zinc, plated nickel over
copper
Spring Latch—Stainless steel
2-56 Screws—Stainless steel
Strain Relief Staple—Steel, plated
tin over nickel
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Instruction Sheet—408-9427
Note: Extra pin contact protection is provided
by rails on the receptacle, which facilitate a
straight-out unmating motion. A side-to-side
rocking motion should not be used to disen-
gage the connector system.
Rear Plug
A
Upper Backshell,
(1 Supplied)
B
Machine Screw
Spring Latch
(2 Supplied)
Connector
(Must be
Purchased
Separately)
C
Lower Backshell
(1 Supplied)
Style A
Straight Exit with Latches
Cable Supplied
by Customer
A
Upper Backshell
(1 Supplied)
Strain Relief Staple
(1 Supplied)
Machine Screw
Spring Latch
(2 Supplied)
Connector
(Must be
B
Purchased
Separately)
C
Lower Backshell
(1 Supplied)
Style A
Angled Exit with Latches
Cable Supplied
by Customer
A
Strain Relief Staple
(1 Supplied)
Spring Latch
(2 Supplied)
Machine Screw
B
Upper Backshell
(1 Supplied)
Connector
(Must be
Purchased
Separately)
C
Lower Backshell
(1 Supplied)
Style B
Straight Exit with Latches
18
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]