408-10033 Datasheet, PDF (6/6 Pages) Tyco Electronics – Reasons for reissue are provided in Section 8, REVISION SUMMARY.

STRATO- THERM Crimping Heads
Inspection of
Wire Barrel Section of
Crimping Chamber
Inspection of
Insulation Barrel Section
of Crimping Chamber
408- 10033
1
1
Jaws Bottomed But
Not Under Pressure
GO Element Must Pass Completely
5
Through Crimping Chamber
4
2
3
NO- GO Element May Start Entry, But Must Not
Pass Completely Through Crimping Chamber
Figure 9
7. REPLACEMENT AND REPAIR
Replacement parts and recommended spares are
listed in Figure 10. The recommended spares should
be stocked for immediate replacement.
Order replacement parts through your Tyco
Electronics Representative, or call 1--800--526--5142,
or send a facsimile of your purchase order to
1--717--986--7605, or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105--3608
For further repair and replacement information,
call the Tyco Electronics Tooling Assistance Center at
the number at the bottom of page 1.
REPLACEMENT PARTS
ITEM PART
NO. NUMBER
DESCRIPTION
1
39207
PIN, Insulation Crimping
Adjustment
2 305363 LOCATOR
3 302994 HOUSING, Locator
4 9--305927--1 SCREW
5 301201 SPRING
Figure 10
QTY
PER
HEAD
2
1
1
1
1
8. REVISION SUMMARY
S Updated document to corporate requirements
6 of 6
Tyco Electronics Corporation
Rev B