101-305 Datasheet, PDF (6/7 Pages) Tyco Electronics – Receptacle Adapter Ultrasonic and One-Piece Die Cast Assembly Operations

101-305
NOT ACCEPTABLE
Allowable Gap
(Up to 0.010 inch
Gap is Allowed)
Figure 10
ACCEPTABLE
Correct Retaining Fork Placement
(Viewed from the
SC Side of Adapter)
Figure 11
NOT ACCEPTABLE
Damaged Retaining Fork Placement
(Viewed from the
SC Side of Adapter)
Figure 12
NOTE
Rev F
The acceptable and not acceptable conditions in Figures 11 and 12 apply to both
Simplex and Duplex Adapters.
6 of 7