101-305 Datasheet, PDF (1/7 Pages) Tyco Electronics – Receptacle Adapter Ultrasonic and One-Piece Die Cast Assembly Operations

Workmanship
Specification
101-305
15Jun07 Rev F
Receptacle Adapter Ultrasonic and One-Piece Die Cast
Assembly Operations
1. SCOPE
This specification covers the acceptable requirements and the not acceptable conditions for the
Receptacle Adapter Ultrasonic and One-Piece Die Cast Assembly Operations.
2. INSPECTION CRITERIA
Unless otherwise specified, figures are shown at approximately 10X magnification. The Ultrasonic
Assembly and the Die Cast Assembly will be inspected without magnification.
NOTE
Even though the pictorials shown in this document are of the SC product family,
they are representative of all types of receptacle adapters.
ACCEPTABLE
Tool Marks
Figure 1
NOTE
If less than 50% of the lead in chamfer has been damaged due to tool marks, the part is
considered ACCEPTABLE.
8 2007 Tyco Electronics Corporation,
Harrisburg, PA
All International Rights Reserved
* Trademark
| Indicates change
1 of 7
LOC B