English
Language : 

1-1462051-6 Datasheet, PDF (6/6 Pages) Tyco Electronics – HF3 Relay
RF Signal Relays
HF3 Relay (Continued)
Product code structure
Type
Coil
HF3 Signal Relays HF3 Series
1 form C, 1 CO
Coil code: please refer to coil versions table
Performance type
5x 50Ω version, monostable 1coil
7x 50Ω version, bistable 1coil
9x 50Ω version, bistable 2coils
0x 75Ω version, monostable 1coil
2x 75Ω version, bistable 1coil
4x 75Ω version, bistable 2coils
AXICOM
Typical product code HF3 53
Product code
Arrangement
Version
Coil
Coil type
Part number
HF3 51
1 form C (1 CO)
50ohm
3VDC
Monostable
1462051-1
HF3 52 4.5VDC 1-1462051-6
HF3 53 5VDC 1462051-2
HF3 54 6VDC 1-1462051-7
HF3 55 9VDC 1462051-3
HF3 56 12VDC 1462051-4
HF3 57 24VDC 1462051-5
HF3 71
1 form C (1 CO)
50ohm
3VDC
Bistable 1 coil
1462051-6
HF3 72 4.5VDC 1-1462051-8
HF3 73 5VDC 1462051-7
HF3 76 12VDC 1462051-9
HF3 91
1 form C (1 CO)
50ohm
3VDC
Bistable 2 coils
1-1462051-1
HF3 92 4.5VDC 2-1462051-0
HF3 93 5VDC 1-1462051-2
HF3 95 9VDC 1-1462051-3
HF3 96 12VDC 1-1462051-4
HF3 97 24VDC 1-1462051-5
HF3 01
1 form C (1 CO)
75ohm
3VDC
Monostable
1462050-1
HF3 02 4.5VDC 1-1462050-6
HF3 03 5VDC 1462050-2
HF3 06 12VDC 1462050-4
HF3 07 24VDC 1462050-5
HF3 21
1 form C (1 CO)
75ohm
3VDC
Bistable 1 coil
1462050-6
HF3 23 5VDC 1462050-7
HF3 26 12VDC 1462050-9
HF3 41
1 form C (1 CO)
75ohm
3VDC
Bistable 2 coils
1-1462050-1
HF3 43 5VDC 1-1462050-2
HF3 46 12VDC 1-1462050-4
HF3 47 24VDC 1-1462050-5
This list represents the most common types and does not show all variants covered by this data sheet.
Other types on request
6
06-2013, Rev. 0613
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.