MA4SW424B-1 Datasheet, PDF (5/6 Pages) Tyco Electronics – Monolithic SP4T PIN Diode Switch With Integrated Bias Network

Monolithic SP4T PIN Diode Switch with Integrated Bias Network
Microwave Performance
MA4SW424B-1
V 1.00
MA4SW424B-1 TYPICAL OUTPUT RETURN LOSS
0.00
-5.00
-10.00
-15.00
-20.00
-25.00
-30.00
22
22.5
23
23.5
24
24.5
25
25.5
26
Frequency (GHz)
J2
J3
J4
J5
MA4SW424B-1 TYPICAL ISOLATION
0.00
-10.00
-20.00
-30.00
-40.00
-50.00
-60.00
-70.00
-80.00
22
22.5
23
23.5
24
24.5
25
25.5
26
Frequency (GHz)
J1-J2
J1-J3
J1-J4
J1-J5
RF Performance Notes
1. The Graphs Represent On-Wafer measurements only. Due to the nature of the design and the implementation
of the device, Ribbon / Wire bonding will shift the frequency response for better RF Match at 24GHz.
- Recommended Wire: (2) 1mil dia. wire, 10mils long or less per RF bond pad.
- Recommended Ribbon: (1) ¼ x 3mil Ribbon, 10 mils long or less per RF bond pad.
2. Tuning Stubs are positioned adjacent to Each RF Pad to Optimize Performance.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
5
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]