MA4SW424B-1 Datasheet, PDF (2/6 Pages) Tyco Electronics – Monolithic SP4T PIN Diode Switch With Integrated Bias Network

Monolithic SP4T PIN Diode Switch with Integrated Bias Network
MA4SW424B-1
V 1.00
Electrical Specifications @ T_A = + 25 °C (On-Wafer Measurements Only)
Parameters
Insertion Loss
Isolation
Input Return Loss
Switching Speed¹
Frequency
24 GHz
24 GHz
24 GHz
24 GHz
Minimum
-
37
-
-
Nominal
3.0
40
9
200
Maximum
3.5
-
-
-
Units
dB
dB
dB
nS
1. Typical Switching Speed measured from 10 % to 90 % of detected RF signal driven by TTL compatible drivers using RC Output
Spiking Network, where R = 50 – 200 Ω, C = 390 – 560 pF.
Operation of the MA4SW424B-1
Operation of the MA4SW424B-1 Series PIN Diode Switch is achieved by the Application of D.C.
Current ( 12mA ) to the Bias Port of the Selected Insertion Loss Port and 0V Bias for the Isolated
Ports. The control currents should be supplied by constant current sources.
Driver Connections for the MA4SW424B-1
B2
+12 mA
D.C. Bias Conditions
B3
B4
0 Volts
0 Volts
B5
0 Volts
J1-J2
Low Loss
RF Output Conditions
J1-J3
J1-J4
Isolation
Isolation
0 Volts
0 Volts
0 Volts
+12 mA
0 Volts
0 Volts
0 Volts
+12 mA
0 Volts
0 Volts
0 Volts
+12 mA
Isolation
Isolation
Isolation
Low Loss
Isolation
Isolation
Isolation
Low Loss
Isolation
J1-J5
Isolation
Isolation
Isolation
Low Loss
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]