643424-1 Datasheet, PDF (5/6 Pages) Tyco Electronics – 2-Piece Power Connectors

TE Connectivity
2-Piece Power Connectors
Industry Standards
PRODUCTS
Standards
Z1 Power Connector
MINIPAK HD
Guide Hardware
Advanced TCA
1766500-1
1-1469373-1
PICMG MicroTCA.0
1469920-1
VITA 41
1410465-1
VITA 46
1410956-1
VITA 62
Note: Part numbers listed in the above table are some available samples for each standard. There are other part numbers and configurations to choose from.
MULTI-BEAM XLE
6450843-6
AdvancedTCA
The PICMG 3.0
AdvancedTCA standard
defines architecture
for modular computing
components within
communications network
infrastructure. The
standardization focuses
on providing superior
power and cooling
capabilities in solutions
that are cost effective,
highly available and
highly scalable.
MicroTCA
The PICMG
MicroTCA.0 standard is
complimentary to the
AdvancedTCA standard,
but is optimized for
smaller scale and
more price sensitive
applications.
VITA 41
Referred to as VXS-
VME Switched Serial in
the next generation of
VME backplanes and
introduces features like
improved bandwidth,
backward compatibility
and increased power
delivery into the existing
VMEbus technology.
VITA 46
Based on VMEbus
technology, the standard
is defined for 3U and 6U
formats and merges the
latest in connector and
packaging technology
with the latest in bus and
serial fabric technology.
VITA 62
The latest in VITA
Standards, VITA 62 is
currently being defined
and will use the standard
VPX 3V16U form factor and
comply to requirements
defined in VITA. 48.0. VITA
62 will define the power
generation requirements
for a module that can be
used to power systems
that support a VITA 62 slot
on the VPX backplane.
te.com/products/guidehardware
Guide Hardware
• Guide modules are available for the
AdvancedTCA, VITA 41.0 VXS and the
VITA 46.0 VPX standards
• Most guide modules are keyed to
prevent misalignment during board-
to-board mating
• ATCA guide modules are available
for a variety of applications including
front board, mid plane, backplane and
rear transition modules as specified in
the AdvancedTCA specification
• MULTIGIG RT guide modules meet
the VITA 46.0 VPX and VITA 41 VXS
standards
For more information on TE Industry
Standard Products visit:
te.com/products/atca
te.com/products/multibeamxle
MULTI-BEAM XLE Connector
• VITA 62 standard developed around
MULTI-BEAM XLE connector
• New 6 beam power contacts offer
a 50A current rating and lower
mating force
• New 20A low power contact
occupies 50% less PCB space than
MULTI-BEAM XL power contacts
• Vented housing allows for better heat
dissipation
te.com/products/atcapower
Z1 Power Connector
• Designed to PICMG 3.0 AdvancedTCA
standard
• Combines 8 high conductivity size 16
pin & socket contacts with 22 size 22
pin & socket contacts
• Capable of carrying 20 Amps per
contact and the signals are capable
of carrying 2 Amps per contact
MINIPAK HD Connectors
• Designed to the MicroTCA.0 standard
• 30 microinches gold plating over
nickel
• Hot-plug contact design controls arc
during hot-mate/un-mate cycles
• Available to carry up to 14.5 Amps
per contact fully loaded
te.com/products/minipakhd
AdvancedTCA, MicroTCA and PICMG are trademarks of
PICMG-PCI Industrial Computer Manufacturers Group, Inc.
VITA, VMEbus, VPX, and VXS are trademarks of VITA.
te.com/powerconnectors