V23079_06 Datasheet, PDF (4/14 Pages) Tyco Electronics – P2 V23079 Relay

Dimensions
AXICOM
Telecom-, Signal and RF Relays
P2 V23079 Relay
108-98002 Rev. D
Dimensions in mm
THT
THT
SMT long terminals
SMT long terminals
SMT short terminals
SMT short terminals
V23079-x1xxx-B301
V23079-x2xxx-B301
V23079-x1xxx-B301
V23079-x2xxx-B301
V23079-x1xxx-B301
V23079-x2xxx-B301
standard coil
overmolded coil
standard coil
overmolded coil
standard coil
overmolded coil
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
L 14.5 ± 0.10 0.570 ± 0.004 14.6 ± 0.10 0.575 ± 0.004 14.5 ± 0.10 0.570 ± 0.004 14.6 ± 0.10 0.575 ± 0.004 14.5 ± 0.10 0.570 ± 0.004 14.6 ± 0.10 0.575 ± 0.004
W 7.2 ± 0.10 0.283 ± 0.004 7.2 ± 0.10 0.283 ± 0.004 7.2 ± 0.10 0.283 ± 0.004 7.2 ± 0.10 0.283 ± 0.004 7.2 ± 0.10 0.283 ± 0.004 7.2 ± 0.10 0.283 ± 0.004
H 9.8 ± 0.10 0.385 ± 0.004 9.5 ± 0.10 0.374 ± 0.004 10.4 ± 0.15 0.409 ± 0.006 9.9 ± 0.10 0.390 ± 0.004 10.4 ± 0.15 0.409 ± 0.006 9.9 ± 0.10 0.390 ± 0.004
T 3.25 – 0.25 0.128 – 0.010 3.25 – 0.25 0.128 – 0.010 N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
T1 N/A
N/A
N/A
N/A
5.52 ± 0.15 0.217 ± 0.006 5.52 0.217 ± 0.006 5.52 0.217 ± 0.006 5.52
0.217 ±0.006
T2 N/A
N/A
N/A
N/A
9.4 ± 0.15 0.370 ± 0.006 9.4 ± 0.15 0.370 ± 0.006 7.4 ± 0.15 0.291 ± 0.006 7.4 ± 0.15 0.291 ±0.006
Tw 0.5 ± 0.05 0.020 ± 0.002 0.5 ± 0.05 0.020 ± 0.002 0.5 ± 0.05 0.020 ± 0.002 0.5 ± 0.05 0.020 ± 0.002 0.5 ± 0.05 0.020 ± 0.002 0.5 ± 0.05 0.020 ±0.002
S 0.55 – 0.15 0.022 – 0.006 0.45 0.018 ± 0.002 N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
THT Version
SMT Version
Long terminals
Short terminals
Mounting hole layout
View onto the component
side of the PCB (top view)
Solder pad layout
View onto the component side of the PCB (top view)
Long terminals
Short terminals
P2 SMT S
0,9 ±0,1
Note: Hole for pin 6 and 7
only for latching with 2 coils.
Basic grid 2.54 mm
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Terminal assignment
Relay – top view
Non-latching type
not energized condition
Latching type,
reset condition
Latching, 2 coils
reset condition
Contacts in reset
position. Both coils can
be used either as set or
reset coils.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
 of 14