V23079_06 Datasheet, PDF (10/14 Pages) Tyco Electronics – P2 V23079 Relay

AXICOM
Telecom-, Signal and RF Relays
P2 V23079 Relay
Insulation
Insulation resistance at 500 Vdc
Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
Surge voltage resistance
according to Telcordia TR-NWT-001089 (2 /10 µs)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
according to FCC 68 (10/160 µs)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
Insulation according to IEC / EN 60950
Clearance
Creepage distance
Standard Version
> 10⁹ Ω
1500 Vrms
1000 Vrms
1000 Vrms
2500 V
2500 V
2000 V
1500 V
1500 V
1500 V
Basic insulation
1.3 mm
2.5 mm
108-98002 Rev. D
High dielectric Version
> 10⁹ Ω
1500 Vrms
1500 Vrms
1500 Vrms
2500 V
2500 V
2500 V
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
RF Characteristics
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
General Data
Operate time at U_nom typ. / max.
Reset time (latching) at U_nom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
Shock resistance, half sinus, 11 ms
Degree of protection / Environmental protection
Needle flame test
Mounting position
Processing information
Weight (mass)
Terminal surface
Moisture sensitive level (JEDEC J-STD-020B) - SMD types
Resistance to soldering heat
All data refers to 23 °C unless otherwise specified.
max. 2 pF
max. 1.5 pF
max. 1 pF
- 39.0 dB / - 20.7 dB
- 0.02 dB / - 0.27 dB
1.04 / 1.40
3 ms / 4 ms
3 ms / 4 ms
2 ms / 4 ms
4 ms / 6 ms
1 ms / 3 ms
50 operations/s
-40 °C ... +85 °C
< 125 K/W
125 °C
35 G
10 to 1000 Hz
50 G (function)
150 G (damage)
immersion cleanable, IP 67 / RT III
application time 20 s, no burning < 15s
any
Ultrasonic cleaning is not recommended
max. 2.8 g
SnCu 0.7
MSL 3
265 °C / 10 s
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10 of 14