6-1393298-5 Datasheet, PDF (4/4 Pages) Tyco Electronics – Automotive Relays Plug-in Mini ISO Relays

Automotive Relays
Plug-in Mini ISO Relays
VF4A (Standard, Shrouded and Weatherproof) (Continued)
Product code structure
Typical product code VF4
-1
5
F 11 -S01
Type
VF4A VF4A
Cover type
1
Dust cover standard
2
3
Weatherproof cover standard 4
5
Shrouded dust cover with bracket 6
Contact arrangement
5
1 form C, 1 CO
Coil
F
12VDC
H
Contact material
11 Silver based
21
Coil suppression
S01 Resistor in parallel (680Ω)
S05
S08 Resistor in parallel (2700Ω)
Shrouded dust cover standard
Dust cover with bracket
Weatherproof cover with bracket
24VDC
Silver based for capacitive loads
Diode in parallel (cathode 86)
Product code Arrangement Cover
Coil suppr. Circuit¹⁾
Coil Cont. material Terminals Part number
VF4A-15F11
1 form C,
Standard
CO
12VDC Silver based Plug-in, QC 6-1393298-0
VF4A-15F11-S01
1 CO
Resistor 680Ω
COR
6-1393298-4
VF4A-15F11-S05
Diode (cathode 86)
COD 6-1393298-5
VF4A-15F21-S01
Resistor 680Ω
COR
Silver based²⁾ 7-1393298-3
VF4A-15H11
CO
24VDC Silver based
8-1393298-1
VF4A-15H11-S08
Resistor 2700Ω
COR
5-1393305-7
VF4A-45F11
Bracket
CO
12VDC
8-1393298-8
VF4A-45F11-S01
Resistor 680Ω
COR
1-1393302-0
VF4A-45H11
CO
24VDC
1-1393302-1
VF4A-55F11-S01
Shrouded Resistor 680Ω
COR
12VDC
8-1393305-7
VF4A-65F11-S01
Weatherproof
9-1393305-5
VF4A-65H11-S08
Resistor 2700Ω
24VDC
9-1393305-9
1) See terminal assignment diagrams.
2) Special contact material for capacitive loads.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
4
03-2012, Rev. 0312
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.