408-9242 Datasheet, PDF (4/4 Pages) Tyco Electronics – Read these and all referenced materials before using the die assemblies.

Crimping Die Assemblies 58237-1 and 58237-2
408-9242
4. Try to insert the NO–GO element. The NO–GO
element may enter partially, but must not pass
completely through the length of the die closure.
5. Repeat Steps 3 and 4 for each crimp section
listed in the chart.
If the crimping chambers conform to the gage
inspection, the die assembly may be considered
dimensionally correct, and should be lubricated with a
THIN coat of any good SAE 20 motor oil. If not, the
die assembly must be returned to Tyco Electronics for
further evaluation and repair. Refer to Section 6,
REPLACEMENT AND REPAIR.
For additional information regarding the use of plug
gages, refer to 408–7424.
6. REPLACEMENT AND REPAIR
Customer–replaceable parts are listed in Figure 4.
A complete inventory can be stocked and controlled
to prevent lost time when replacement of parts is
necessary. Order replacement parts through your
Tyco Electronics representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
7. REVISION SUMMARY
Revisions to this instruction sheet include:
S Replaced ferrule parts in Figure 1 with numbers
for superseding RoHS compliant parts.
S Replaced obsolete hand tool references and
artwork with current active hand tool.
S Added proper use guidelines.
S Updated document to corporate requirements.
23.1
24.6
[.91]
[.97]
2
3
43.36
[1.707]
13.46+.05
[.530+.002]
Weight: Approx. 113.2 g [4 oz.]
1
6
5
CUSTOMER-REPLACEABLE PARTS
ITEM
DIE ASSEMBLY PART NUMBER
58237-1
58237-2
DESCRIPTION
1
306105-7
306105-7
SCREW, Special
2
313164-2
313164-2
INDENTER, (Stationary Die)
3
313173-1
313173-2
INDENTER, Insulation
4
1- 21046-3
1- 21046-3
RING, Retaining
5
313174-1
313174-2
ANVIL, Insulation
6
313170-1
313170-1
ANVIL, (Moving Die)
Figure 4
4 of 4
Tyco Electronics Corporation
4
QTY PER ASSY
2
1
1
2
1
1
Rev B