108-61125 Datasheet, PDF (4/7 Pages) Tyco Electronics – Floating Battery Interconnection System Connector

FBIS-II Connector
(Floating Battery Interconnection System Connector)
108-61125
Para.
3.5.8
Test Items
Insertion Force
(Mating Force)
Requirements
1Pos.: 1 N Max.
3.5.9
Withdrawal Force
(Un-mating Force)
1Pos.: 0.1 N Min.
3.5.10 Durability
No contact crack allowed
(Automatic Operation)
3.5.11 Manual Durability
No contact crack allowed
Procedures
・Operation Speed：100mm/min.
・Measure the force required to mate
connectors
・EIA 364-13
・Operation Speed：100mm/min.
・Measure the force required to unmate
connectors
・EIA 364-13
・Operation Speed：600cycles/hour Max.
・Number of Cycles：1000 cycles
・As shown in Fig.3-1, 3-2
・EIA 364-9
・Number of Cycles：1000 cycles
・As shown in Fig.3-1, 3-2
・EIA 364-9
3.5.12 Thermal Shock
3.5.13 Cyclic Humidity
3.5.14 ^{Temperature Life}
(Heat Aging)
3.5.15 Salt Spray
3.5.16 Resistance to Reflow
Heat
Environmental Requirements
No physical damage allowed
・Mated connector,
・-55℃/30min. 105℃/30min.
Make this a cycle,
repeat 5 cycles.
・5min(max.)transition to 105℃,
・5min(max.)transition to -55℃
・EIA 364-32
No physical damage allowed
・Mated connector,
・25℃±3℃ at 80%±3% RH and
65℃±3℃ at 50%±3% RH.
24cycles
・Ramp times should be 0.5 hour and dwell
times should be1.0hour.
Dwell times start when the
temperature and humidity have stabilized
within the specified levels.
・EIA 364—31
No physical damage allowed
・Mated connector
・85℃ for 120 hours
・EIA 364-32
No corrosion that damages
function of connector allowed
・Mated connectors with
5% , 35℃ concentration for
96hours
・EIA 364-26
No physical damage allowed
・Temperature profile;
IPC/JEDEC J-STD-020D or latest revision
level
Fig. 1 (End)
Rev. A
4 of 7