M24C16_10 Datasheet, PDF (36/39 Pages) STMicroelectronics – 16 Kbit, 8 Kbit, 4 Kbit, 2 Kbit and 1 Kbit serial I²C bus EEPROM

Revision history
M24C16, M24C08, M24C04, M24C02, M24C01
Table 30. Document revision history (continued)
Date
Version
Changes
7-Oct-2005
Product List summary table added. AEC-Q100-002 compliance. Device
6.0
Grade information clarified. Updated Device internal reset section,
Figure 4, Figure 5, Table 16 and Table 24 Added ECOPACK® information.
Updated tW=5ms for the M24Cxx-W.
Pin numbers removed from silhouettes (see on page 1). Internal Device
Reset paragraph moved to below Section 2.4: Supply voltage (VCC).
Section 2.4: Supply voltage (VCC) added below Section 2: Signal
17-Jan-2006 7.0 _{description. Test conditions for VOL updated in Table 9 and Table 10 SO8N}
package specifications updated (see Table 20)
New definition of I_CC1 over the whole V_CC range (see Tables 9, 10 and 11).
Document converted to new ST template.
SO8 and UFDFPN8 package specifications updated (see Section 7:
19-Sep-2006
8
Package mechanical data). Section 2.4: Supply voltage (VCC) clarified.
I_LI value given with the device in Standby mode in Tables 9, 10 and 11.
Information given in Table 16: AC characteristics (M24Cxx-R and M24Cxx-
F) are no longer preliminary data.
1.7 V to 5.5 V V_CC voltage range added (M24C16-F, M24C08-F, M24C04-F
part numbers added; Table 8 and Table 12 added).
Section 2.4: Supply voltage (VCC) modified.
Note 1 updated to latest standard revision in Table 5: Absolute maximum
ratings.
Rise/fall time conditions for I_CC modified in Table 9, Table 10 and Table 11.
I_CC1 conditions modified in Table 11: DC characteristics (M24Cxx-R).
03-Aug-2007 9 _{Note removed below Table 14: Input parameters.}
t_W modified for M24Cxx-R in Table 16, note added.
TSSOP8 (DS) package specifications updated (see Table 23 and
Figure 17).
Added: Table 25, Table 26, Table 27, Table 28 and Table 29 summarizing
all available products.
Table 24: Ordering information scheme: Blank option removed under
Plating technology, /W removed under Process.
Section 2.3: Chip Enable (E0, E1, E2) updated.
Concerned signals specified for V_IL and V_IH parameters, and note removed
in DC characteristics tables (Table 9, Table 10, Table 11 and Table 12).
27-Sep-2007 10
t_W modified in Table 16: AC characteristics (M24Cxx-R and M24Cxx-F).
M24C08-F and M24C04-F offered in UFDFPN8 package in the
temperature range 5 (see Table 26 and Table 27).
36/39
Doc ID 5067 Rev 16