S1125-KIT-5 Datasheet, PDF (3/8 Pages) Tyco Electronics – Adhesives

Adhesives
Adhesive/Sealant Product Characteristics Tables (Continued)
Pot Life
at 23°C [73.4°F]
Curing
Conditions
1h
20 min.
90 min.
96 h at 20°C [68°F] min. or
1 hr at 120°C [248°F]
24 h at 20°C [68°F] min. or
1 hr at 95°C [203°F]
45 min at 120°C [248°F]
2 h at 155°C [311°F] min. or
15 min at 240°C [464°F]
24 h at 20°C min. or
1 hr at 85°C [185°F]
Shelf life* at
or below
25°C [77°F]
2 years
1 year Kit 8
2 years
1 year Kit 8
1 year
18 months
1 year Kit 8
Specifications**
Comments
RT-1006
RK-6612
MIL-A-46864****
RT-1009
RT-1014
RT-1011
RK-6619
VG-95343
General purpose harnessing adhesive.
Not used on Viton^® fluoroelastomers, silicone
or Kynar^®; 20-minute pot life
General purpose harnessing adhesive
Not used on Viton^® fluoroelastomers or silicone;
20-minute pot life
One-part epoxy tape used with Viton^® fluoroelastomer
harness systems. Heat cure required
(2 hours at 155°C [311°F])
Good fluid-resistant epoxy used with
System 25
Cure during installation
of molded parts
36 months
—
120°C [248°F]
Unlimited
—
120°C [248°F]
Unlimited
—
160°C [320°F]
Unlimited
—
135°C [275°F]
Unlimited
—
120°C [248°F]
Unlimited
—
110°C [230°F]
Unlimited
—
110°C [230°F]
Unlimited
*Shelf life from date of manufacture.
**For specific adhesion properties, see product specification sheets.
***Passes cold bend at -40°C [-40°F] per RT-4204.
****Only S-1006 Kit A conforms to MIL-A-46864.
VG-95343
RK-6630
RT-1050/1
RT-1050/6
RK-6017
RT-1050/3
RK-6626
RT-1050/13
RW-2019
RW-2020
RW-2021
Precoated epoxy system for System 25
General purpose harnessing adhesive
Standard precoated adhesive for -3
and -4 molded parts
Good low-temperature flexibility
Available as a preinstalled tape for
molded parts
Requires high temperature to achieve
bonding. Highest service temperature
for hot melt
Requires reflowing in an oven at 150°C [302°F]
for 90 minutes. Designed to bond to
-51 molded parts.
General purpose harnessing adhesive
Standard precoated adhesive in
Sigmaform molded parts, CES and
CSGA cable entry seals, and SST-FR
heat-shrinkable tubing
General purpose sealant and cable
breakout area filler
Halogen-free, flame-retardant sealant
and cable breakout area filler
5
VITON is a trademark of DuPont
Performance Elastomers
Catalog 1654025
Revised 12-04
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
5-3
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171