English
Language : 

S1125-KIT-5 Datasheet, PDF (1/8 Pages) Tyco Electronics – Adhesives
Adhesives
Table of Contents
Tyco Electronics manufac-
turers Raychem adhesives
and sealants to accommo-
date a wide range of appli-
cations, materials, and
environmental conditions.
Raychem adhesives include
both thermosets and ther-
moplastics.
Thermosets are curable
two-part epoxies or
crosslinked elastomers.
Thermoplastics are hot-melt
adhesives that flow when
heated and set when
cooled. They reflow when
reheated to simplify
component repair.
Tyco Electronics also
manufactures Raychem
products that include a
thermoplastic adhesive or
a mastic-type sealant for
water holdout applications.
The sealants adhere to non-
oily substrates and can be
removed where reentry is
necessary.
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
Adhesive/Sealant Product Characteristics Table . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2, 5-3
Adhesive/Sealant Selection Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5 to 5-7
5
Selection Guide
Note: Users should independently
evaluate the suitability of the
product for their application.
Before ordering, check with
Tyco Electronics for most
current data.
To determine the adhesive
or sealant most compatible
with a Raychem part, you
must know the part’s
product type.
Use the Adhesive/Sealant
Selection Table on page 5-4
to determine a Raychem
part’s product type and the
adhesive/sealant compatible
with that type.
Use the Adhesive/Sealant
Product Characteristics
Table (pages 5-2 and 5-3)
to be sure the adhesive or
sealant has the product
characteristics your appli-
cation requires.
To use the Selection Table,
follow these four steps:
1. Under “Substrate
Category,” find the prod-
uct material and product
name/part number for the
Raychem part.
2. Across the top of the
table, find the part’s
product type and dash
number.
3. At the intersection of the
substrate category (prod-
uct material/name/part
number) and the product
type (by designated
dash number) you will
find the part number for
the most compatible
adhesive for the
Raychem part.
4. See the Adhesive/
Sealant Product
Characteristics Table to
verify the characteristics
of the adhesive/sealant
you selected.
5-1
Catalog 1654025
Revised 12-04
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171