MA03503D_1 Datasheet, PDF (3/6 Pages) Tyco Electronics – Control Chip, Parallel Input Gain/Phase Control 8.0-11.0 GHz

Control Chip, Parallel Input Gain/Phase Control
8.0-11.0 GHz
Recommended Operating Conditions ³
MA03503D
MA03503D
Rev A
Preliminary Information
Characteristic
Drain Supply Voltage
Gate Supply Voltage
Digital Power Supply Voltage
Input Logic High Voltage
Input Logic Low Voltage
Clock Frequency
Junction Temperature
MMIC Base Temperature
Symbol
Min
V_DD
4.0
V_GG
-4.5
V_EE
-4.2
V_IH
3.0
V_IL
0.0
F_CLK
T_J
T_B
Typ
Max
Unit
5.0
6.0
V
-4.0
-3.5
V
-4.0
-3.8
V
3.5
5.0
V
0.0
0.8
V
20
MHz
150
ºC
Note 4
ºC
3. Operation outside of these ranges may reduce product reliability.
4. Maximum MMIC Base Temperature = 150°C— 31.8° * V_DD * I_DQ
Operating Instructions
This device is static sensitive. Please handle with
care. To operate the device, follow these steps.
1. Apply V_GG = -4 V, V_EE = -4V, V_DD= 0 V.
2. Ramp V_DD to desired voltage, typically 5 V.
3. Adjust V_GG to set I_DQ.
4. Set RF input.
5. Power down in reverse. Turn V_GG off last.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.