91350-1 Datasheet, PDF (3/4 Pages) Tyco Electronics – Seating Tools 91347- [ ], 91350- [ ]

Seating Tools 91347- [ ], 91350- [ ], and 91376- [ ]
408- 8500
2. Ensure that the screws are in place and
secured.
3. When the tool is not in use, store it in a clean,
dry area.
6. REPLACEMENT AND REPAIR
Order replacement seating tools through your local
Tyco Electronics Representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 717--986--7605, or write to:
5.2. Inspection
Each seating tool is assembled and inspected before
shipment. It is recommended that the tool be
inspected using Figure 3 immediately upon arrival to
assure that it has not been damaged during shipment.
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the tool or be supplied to
personnel responsible for the tool. The inspection
frequency should be based on the amount of use,
working conditions, operator training and skill, and
established company standards.
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
7. REVISION SUMMARY
Revisions to this instruction sheet include:
S Updated document to corporate requirements
S Added new text to Paragraph 3.2
S Added seating tool dimension to Figure 2
Seating Tool 91347- [ ] (4- Pair Connector)
25.4
[1.00]
22.5
[.884]
B
D
E
C
4.44 [.175]
(F Places)
A
33.0
[1.30]
DIMENSION
SEATING TOOL
F
A
B
C
D
E
91347--1
5.46 [.215]
15.49 [.610]
25.4 [1.000]
—
—
2
91347--2
5.21 [.205]
27.69 [1.090] 37.34 [1.470]
—
—
2
91347--3
5.26 [.207]
20.24 [.797] 29.97 [1.180]
—
—
2
91347--4
5.18 [.204]
15.19 [.598] 49.78 [1.960] 30.18 [1.188] 40.18 [1.582]
4
91347--5
5.38 [.212]
—
12.70 [.500]
—
—
1
Figure 3 (Cont’d)
Rev F
Tyco Electronics Corporation
3 of 4