English
Language : 

91350-1 Datasheet, PDF (1/4 Pages) Tyco Electronics – Seating Tools 91347- [ ], 91350- [ ]
Seating Tools 91347- [ ], 91350- [ ], and
91376- [ ] for Z- PACK* Hard Metric (HM)- Zd
Receptacle Connectors
Instruction Sheet
408- 8500
21 JUN 10 Rev F
Seating Tool 91376- 1
(Shown)
HM- Zd 3- Pair Receptacle
Connector (Shown)
Eye- of- Needle
Contacts
Printed Circuit (PC)
Board
SEATING
TOOL
91350--[ ]
91376--[ ]
91347--[ ]
CONNECTOR
TYPE
2--Pair
3--Pair
4--Pair
Figure 1
PC Board Support Fixture
(Custom Designed)
1. INTRODUCTION
Seating Tools 91347--[ ], 91350--[ ], and 91376--[ ] are
used to seat Z--PACK HM--Zd receptacle connectors
onto a pc board. See Figure 1. Dash number
indicates number of connector columns. The
connectors contain eye--of--needle contacts which
allow solderless pc board installation.
NOTE
i
All numerical values in this instruction sheet are
in metric units [with U.S. customary units in
brackets]. Dimensions are in millimeters [and
inches]. Figures are not drawn to scale.
2. DESCRIPTION
The seating tool is a one--piece design. During
seating, the seating tool covers the connector and
presses on the top surface of the connector when the
applicator ram applies force to the seating tool.
3. REQUIREMENTS
3.1. PC Board Support Fixture (Custom Designed)
A pc board support must be used to provide proper
support for the pc board and alignment of the tool to
the contacts and to protect the pc board and contacts
from damage.
Read these instructions and understand them before
using the seating tool.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
3.2. Application Tooling
Power for seating tools must be provided by a
machine capable of supplying a downward force of
89 Newtons (N) [20 lb] per contact. Manual Electric
Servo Press (MEP 6T) 1585699--1, Bench Top
E2010 Tyco Electronics Corporation, Berwyn, PA
TOOLING ASSISTANCE CENTER 1- 800- 722- 1111
All Rights Reserved
PRODUCT INFORMATION 1- 800- 522- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 4
LOC B