|
408-9913 Datasheet, PDF (3/3 Pages) Tyco Electronics – Read these instructions thoroughly before using the seating tool. | |||
|
◁ |
Seating Tools 90754-[ ]
408-9913
4.1. Daily Maintenance
It is recommended that each operator be made aware
of, and responsible for, the following steps of daily
maintenance:
1. Remove dust, moisture, and contaminants with
a clean, soft brush or a lintâfree cloth. DO NOT
use objects that could damage the tool
components.
2. Ensure that setscrews are in place and secured.
3. When the tool is not in use, store it in a clean,
dry area.
4.2. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the tooling or be supplied to
supervisory personnel responsible for the tool.
Inspection frequency should be based on amount of
use, working conditions, operator training and skill,
and established standards.
5. REPLACEMENT AND REPAIR
Customerâreplaceable parts are listed in Figure 3.
A complete inventory should be stocked and
controlled to prevent lost time when replacement of
parts is necessary. Parts other than those listed
should be replaced by Tyco Electronics to ensure
quality and reliability. Order replacement parts
through your representative, or call 1â800â526â5142,
or send a facsimile of your purchase order to
717â986â7605, or write to:
CUSTOMER SERVICE (038â035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105â3608
For customer repair service, please contact a
representative at 1â800â526â5136.
6. REVISION SUMMARY
Revisions to this instruction sheet include:
S Updated document to corporate requirements
S Modified title of instruction sheet
S Added Tools â2 and â3
S Added text to Section 3
S Replaced customer repair address with phone
number
50.8 [2.00]
2
3
1
38.1 [1.50]
Dim. A
13.34 [.525]
TOOL
-1
-2
-3
DIM. A
49.91 [1.965]
43.89 [1.728]
37.89 [1.492]
ITEM
REPLACEMENT PARTS
PART NUMBER FOR SEATING TOOL
90754-1
90754-2
90754-3
DESCRIPTION
1
354695-2
354695-5
354695-6
BLADE
2
354698-1
3
2-21012-8-
G Tool 90754-1 (shown) requires 5 setscrews
Figure 3
ADAPTER
SETSCREW, Socket, 6-32 .19 in. L
QTY PER
TOOL
1
1
3G
Rev A
Tyco Electronics Corporation
3 of 3
|