408-8589 Datasheet, PDF (3/3 Pages) Tyco Electronics – Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY

Snap-Lock Crimping Die Assembly 1338120-1
The die assembly will not fit properly into the crossed–out tools shown below.
408-8589
PRO-CRIMPER III Hand Tool Frame 354940-1
(Instruction Sheet 408-9930)
SDE PEW-12 Hand Tool 9-1478240-0
(Instruction Sheet 408-8851)
SDE Bench Terminator 1490076-2
(Customer Manual 409-10052)
626 Adapter 679304-1
(Instruction Sheet 408-4070)
Battery Tool (Shouldered Die) 1725837-1, -2
(Customer Manual 409-10053)
Battery Tool (Pin Die) 1213890-1, -2
(Customer Manual 409-10065)
Rev A
Tyco Electronics Corporation
3 of 3