408-10236 Datasheet, PDF (3/3 Pages) Tyco Electronics – The seating tool consists of an adapter, a signal contact blade, and a power contact blade.

Seating Tool Assembly 91360-1
408-10236
2. Ensure that setscrews are in place and secured.
3. When the tool is not in use, store it in a clean,
dry area.
5.2. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the tooling or be supplied to
supervisory personnel responsible for the tool.
Inspection frequency should be based on amount of
use, working conditions, operator training and skill,
and established standards.
parts is necessary. Parts other than those listed
should be replaced by Tyco Electronics to ensure
quality and reliability. Order replacement parts
through your representative, or call 1–800–526–5142,
or send a facsimile of your purchase order to
717–986–7605, or write to:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
For customer repair service, please contact a
representative at 1–800–526–5136.
6. REPLACEMENT AND REPAIR
Customer–replaceable parts are listed in Figure 3.
A complete inventory should be stocked and
controlled to prevent lost time when replacement of
7. REVISION SUMMARY
Revisions to this instruction sheet include:
S Updated document to corporate requirements
ITEM
1
2
3
4
38.1 [1.50]
50.8 [2.00]
3
4
2
13.34 [.525]
PART NUMBER
- 354695-1
-1490428-1
- 354698-1
2-21012-8-
REPLACEMENT PARTS
DESCRIPTION
BLADE, Signal Contact
BLADE, Power Contact
ADAPTER
 SETSCREW, Socket, 6-32 .19 in. L
Figure 3
1
5.97+0.05 [.235+.002]
QTY PER TOOL
1
1
1
4
Rev A
Tyco Electronics Corporation
3 of 3