408-10129 Datasheet, PDF (3/4 Pages) Tyco Electronics – Refer to the specific tooling documents provided in Figure 4 for die installation information for those tools.

SDE Die Sets 1804039-1 and 1976357-1
GO Dia.
Dim.
Suggested Plug Gage Design
NO-GO
Dia. Dim.
-
Die Closure
Configuration
50.8 [2.00]
Min Typ
Die Closure
408-10129
ÉÉÇÇ
GO Element Must Pass Completely
ÉÉÇÇ^{Through Crimping Chamber}
NO-GO Element May Start Entry, But Must Not
Pass Completely Through Crimping Chamber
Die Set
Cavity
SDE Die Sets for Raychem DuraSeal Crimp Splices
Die Closure
Gage Elements
GO
NO-GO
GO
NO-GO
22-18
2.29 [.090]
2.39 [.094]
2.261-2.268 [.0890-.0893]
2.410-2.413] [.0949-.0950]
1804039-1
16-14
2.67 [.105]
2.77 [.109]
2.642-2.649 [.1040-.1043]
2.791-2.794 [.1099-.1100]
12-10
3.71 [.146]
3.81 [.150]
3.683-3.691 [.1450-.1453]
3.833-3.835 [.1509-.1510]
1976357-1
26-22
1.78 [.070]
1.88 [.074]
1.753-1.760 [.0690-.0693]
9. REVISION SUMMARY
Figure 3
S Updated document to corporate requirements
S Added new information to table in Figure 1
S Added “terminal” in conjunction with “splice” in
most places
S Added new text to Paragraph 4.4
S Added new Paragraph 4.5
S Added new artwork to Figure 2
1.902-1.905 [.0749-.0750]
D Rev
Tyco Electronics Corporation
3 of 4